How to fix PlayStation VR2 Sense L2 and R2 issues

If the L2 and R2 button of the PlayStation VR2 Sense Controllers are not working correctly, or at all, then you can take a look at this troubleshooting article from Seeking Tech.

1. For the first step, we recommend checking to see if the L2 and R2 buttons are registering correctly. In order to do so, you can try taking the following steps:

  • To start off, you need to connect the problematic PlayStation VR2 Sense Controller to a computer.
  • Next, you need to visit the Gamepad-Tester website.
  • With the controller connected to the computer, press any buttons on it while you are on the website.
  • You should see a testing page on the website. Press down on the trigger and you should see a number appear. For the L2 and R2, these buttons should register 0.00 when not pressed. When pressed fully down, these triggers should show a value of 1.00.

2. If you are getting different results, then the triggers may not be registering a full range of movement.

In this case, you can try loosening L2 and R2. In order to do so, you can try blowing air inside the seams of the L2 and/or R2 buttons.

Furthermore, you can try quickly and forcibly pressing down on the triggers, wigging the button to the left and right side and then letting go. Keep repeating these flicks until you see the desired results from the Gamepad-Tester website.

3. If the triggers are still not working, then you can try turning the controller off by pressing and holding the PS button for around 10 seconds.

Once the problematic VR 2 Sense page has been turned off, press the PS button again to turn it back on. Afterwards, test the LR or R2 button to see if it is functional.

4. You can also reset the Sense controller by sticking a pin in the tiny hole and then pressing the reset button. You can find these holes in the following location:

Once you are done resetting the controller, you need to pair it again to your PlayStation 5 or PlayStation 5 Digital Edition console. This means that you need to connect the controller to the console via a USB cable and then press the PS button to pair.

4. The unresponsive triggers may also be software related.

In you think that this is the case, then you can try restarting your PS5 to see if doing so will make the L2 and R2 buttons work when you try to play a PS VR2 game again.

5. Of course, you should also keep your games, PlayStation VR2 headset, PlayStation VR Sense Controller and PlayStation 5 all updated to the latest versions. There are some instances where these buttons will work for one game but not another.

A new patch or firmware release may help fix your problems with the triggers.

6. If you still can’t these two buttons to work as intended, then we suggest contacting the support team at PlayStation for additional help. If you are still under warranty, then you should be able to get a replacement for a hardware-related problem.

How to fix Wo Long: Fallen Dynasty input lag issues on PS5, Xbox Series X and S

Wo Long: Fallen Dynasty is an action role-playing game that requires quick reflexes. If you are constantly getting input lag on your PlayStation 5, PlayStation 5 Digital Edition, Xbox Series X or Xbox Series S, then you can check out this troubleshooting guide from Seeking Tech to see how you can make the controls more responsive.

1. For the first step, make sure that you are playing in the Prioritize FPS graphics mode, which targets 60 frames per second, if you haven’t done so already.

By doing so, you should be able to get less latency if you are willing to sacrifice the resolution and other visual fidelity features in this game. You can change modes graphics from the Graphics Settings menu.

2. Furthermore, make sure you have Variable Refresh Rate enabled if your television or monitor uses this feature. This will match the refresh rate of the screen to the frame rate of the game, providing a smoother display that may lead to less input lag.

Aside from the screen settings, you also need to enable this feature from the system menus of your console. On the PS5, you need to go to Settings > Screen and Video > Video Output. On the Xbox Series consoles, you need to head over to Settings > General > TV & display options > Video modes.

To find out more about how you can potentially improve the frame rate in Wo Long: Fallen Dynasty on these consoles, you can take a look at this  prior article.

3. If you are playing with others in online multiplayer, then you should make sure that you have a strong and consistent connection. Otherwise, you may experience network lag that makes your control inputs feel less responsive.

4. Using your wireless controller as a wired one should help with input lag as well. To do so, you first need to connect the game pad to the console via a USB cable.

On the PS5, you then need to go to Settings > Accessories > Controller (General) > Communication Method. You then need to select Use USB Cable.

For the Xbox Series X or S, you simply need to plug in your controller to use it as a wired gamepad.

When playing Wo Long, make sure that your controller stays plugged into the USB port.

How to prevent motion sickness when playing Gran Turismo 7 on PS VR2

Gran Turismo 7 is one of the premier games for the PlayStation VR2. When racing in virtual reality, you may start to feel nauseous, however. To see how you can get the motion sickness to potentially go away, you can take a look at this guide from Seeking Tech.

1. If Gran Turismo 7 is your first virtual reality game, then we suggest that you play a less intensive title so that you can ease your acclimation. It is very easy to get sick in a racing game as there is a disconnect between your brain and body when it comes to driving a car.

Look for a title, such as Moss or Synth Riders Remastered Edition, where there isn’t any locomotion or constant head movements. There are also free PlayStation VR2 demos that you can try on the PlayStation Store.

2. By playing less intensive VR games, you should be able to last longer in the PlayStation VR2 headset without feeling sick.

With that said, you may eventually start to feel a little uncomfortable if you are still new to virtual reality gaming.

As soon as you start feeling that something is off, it is important that you stop immediately and take a break. If you don’t, then the motion sickness will only get worse, which will most likely lead to a longer recovery period.

Over time, you should be able to last longer without getting sick for the less intensive PS VR2 games.

3. You should also make sure that you put on the headset correctly so that the graphics in the games aren’t blurry.

4. Once you feel comfortable with playing the less intensive titles for an extended period, then you can try Gran Turismo 7 again.

When doing so, we recommend that you pick either a convertible or car with big windows to give you a better view of the track. You should also avoid tracks that have dips or elevations when you are trying to be acclimated.

Furthermore, we suggest that you drive around the track slowly in the beginning until you no longer start to feel nauseous.

As we stated above, you should take a break any time you start to feel uncomfortable.

5. Chewing gum, especially one that features ginger, should help prevent nausea if you are still getting motion sickness while playing this racing title.

6. Furthermore, you can also have a small fan blowing on your face to help ward off nausea.

7. Of course, it is a good idea that you keep yourself hydrated as well.

By following the aforementioned tips, you should be able to gradually play GT7 for longer sessions before you start to feel uncomfortable. Eventually, you should be able to race with any car you want at full speed without getting any motion sickness.

What to do if PlayStation VR2 can’t track surroundings

When playing a PlayStation VR2 game on your PlayStation 5 or PlayStation 5 Digital Edition console, you may see a “can’t track surroundings” error appear. To see how you can potentially fix this tracking issue, you can take a look at this troubleshooting article from Seeking Tech.

1. For the first step, make sure that you have appropriate lighting for your room.

For the uninformed, the PlayStation VR2 relies on inside out tracking method. So, unlike the PlayStation VR1, the new iteration requires a well-lit room instead of a dimmer environment.

2. You may also lose tracking if you are looking directly at a light, especially if it is from a really bright source.

So, if possible, you can either try repositioning your play area so that you don’t look directly at a light source, or move the light source around, in order to avoid looking directly into one when you are playing a PS VR 2 game.

3. If you are only looking at a white wall, or a wall that only features one color, then it will be hard for the virtual reality headset to gauge your position. This also applies to the roof and flooring of the room.

To fix this problem to get better tracking, try to place discernible objects on the wall, roof and floor to give the camera some reference points to identify. A popular method of doing so is by using Painter’s Tape as these can be removed easily without leaving behind any residues. You can also use posters, cardboard boxes and other easily distinguishable objects.

4. After making any changes to your surroundings to improve tracking, we suggest re-calibrating the tracking cameras on virtual reality headset.

In order to do so, head back to the PlayStation VR2 menu and then select Tracking Camera Calibration in the VR Headset section. You then need to follow the instructions that appear on the screen to re-calibrate.

5. If you are playing directly in front of the television set or monitor, then you can try enabling Tracking Support. By doing so, this feature will add a border to the social screen, which should help with the headset tracking.

You can find Tracking Support in the Other section of the PlayStation VR2 menu.

To get there, press the PS button and then select Quick Settings > Other Settings. You can also go to the home screen menu of your PS5 and then select Settings > Accessories > PlayStation VR2.

5. The tracking issues may become more prevalent if the PlayStation VR 2 Sense Controllers have low battery life. In this case, recharge them fully to see if you can make the “can’t track surroundings” error messages go away.

6. If you haven’t done so already, make sure update the firmware of your PlayStation VR2 and PlayStation VR2 Sense Controllers if prompted by your PlayStation 5 or PlayStation 5 Digital Edition console as a new software version may fix this tracking issue.

How to disable Wo Long: Fallen Dynasty motion blur

By default, motion blur is enabled for Wo Long: Fallen Dynasty. This visual effect is designed to add smoothness to the action role-playing game. However, it will also make it blurrier when it comes to any sort of motion.

If you would like to disable motion blur, then you can take a look step-by-step tutorial at Seeking Tech.

1. To start off, you need to go to the Graphics Settings menu in the game.

From the Title Screen, you need to select System and then Graphics Settings to get there.

If you are actively playing the game at this moment, then you need to bring up the quick menu by pressing the Options button on PlayStation or Menu button on Xbox. In there, you should select Settings and then Graphics Settings.

2. Inside of the Graphics Settings menu, you should see the Motion Blur setting.

3. Change the Motion Blur setting to Disabled in order to turn it off.

4. Return to the game and you should no longer see the blurring effect when moving the camera and/or moving your character around.

It is important to note that you may be able to tolerate motion blur better in a different graphics mode.

In order to change modes, you need to head back to the aforementioned Graphics Settings menu and then select Mode. You can then switch to a different mode in the next screen. On the PlayStation 5, PlayStation 5 Digital Edition, Xbox Series X and Xbox Series S consoles, you can pick between Prioritize Resolution and Prioritize FPS.

If you still don’t like motion blur after changing graphics modes, then you can disable this visual effect altogether.

How to fix Wo Long: Fallen Dynasty frame rate issues on PS5, Xbox Series X and S

If you are playing Wo Long: Fallen Dynasty on the new consoles, you may notice that the game will become choppier. To see how you can potentially get a smoother frame rate on the PlayStation 5, PlayStation 5 Digital Edition, Xbox Series X or Xbox Series S, you can take a look at this troubleshooting article from Seeking Tech.

1. For the first step, make sure that you are playing this action role-playing game in Prioritize FPS mode. In order to check, you need to take the following steps:

  • If you are in the Title Menu, then you need to select System and then Graphics Settings.
  • If you are currently playing Wo Long, then you need to press the Options button on the DualSense or Menu button on the Xbox Controller. By doing so, you should open a quick menu, where you need to select Settings and then Graphics Settings.
  • From the Graphics Settings menu, select Mode.
  • Finally, make sure that Prioritize FPS is selected.

2. If your television set or monitor supports Variable Refresh Rate then make sure you enable it from the screen’s settings. By doing so, you should be able to remove any small stutters and screen tearing you find in Wo Long: Fallen Dynasty.

On the PS5, you then need to go to Settings > Screen and Video > Video Output > VRR. You then need to set VRR to Automatic.

On the Xbox Series consoles, you need to navigate over to Settings > General > TV & display options > Video modes. You should then make sure that the “Allow variable refresh rate” box is checked.

3. If you have been putting your console in rest mode or sleep mode, then it may lead to general performance problems. In this case, you can simply restart the system to see if you can get better frame rates.

4. On the Xbox Series X and Xbox Series S, the quick resume feature may also cause slowdowns. To fix this, you can reboot the game by doing the following:

  • Press the Xbox button on the controller to open the Guide menu.
  • Move the cursor over to the Wo Long: Fallen Dynasty icon and then press the Menu button.
  • Select Quit in the pop-up menu.
  • Boot up the game again on the home screen.

5. Of course, the development team at Team Ninja could eventually release a patch that may help improve the frame rate. Therefore, you should make sure that you have the latest version of this action RPG downloaded and installed.

How to fix Wo Long: Fallen Dynasty HDR issues on PS5, Xbox Series X and S

You may notice that Wo Long: Fallen Dynasty looks a little off when you are playing the game on the PlayStation 5, PlayStation 5 Digital Edition, Xbox Series X or Xbox Series S consoles. You can check out this troubleshooting guide at Seeking Tech to see how you can fix this graphics problem in the action role-playing game.

1. To start off, we recommend that you check to see if your console has been properly calibrated for HDR output.

In order to do so on the PS5, you need to head over to Settings > Screen and Video > Video Output > Adjust HDR. You should then see instructions appear on the screen that will guide you to calibrating the HDR output of your console for the television set or gaming monitor.

For the Xbox Series X and Series S, you need to head straight to Settings > General > TV & display options > Calibrate HDR for Games. Afterwards, you should see a set of instructions telling you how to match your console’s HDR output to the screen.

2. You can also check to see if you have HDR support enabled in Wo Long: Fallen Dynasty by taking the following steps:

To start off, you can select System and then Graphics Settings from the Title Menu. If you are currently playing the game, then you can press the Options button on PlayStation or Menu button on Xbox to open the Quick Menu, where you can select Settings and then Graphics Settings.

In the Graphics Settings menu, you should make sure that HDR is set to Enabled.

3. You can also try using the Adjust HDR setting from the same Graphics Settings menu.

In the next screen, you will be able to adjust the Maximum Brightness, Standard Brightness, Saturation, Brightness and Contrast levels. You can the description for each of these parameters below:

Maximum Brightness:

  • “The maximum brightness value shown in-game will be set. Adjust the image until the bright area is displayed as desired.”

Standard Brightness:

  • “The maximum white brightness will be set.”

Saturation:

  • “Color saturation levels will be set. Adjust the saturation of the image.”

Brightness:

  • “The screen’s overall brightness will be set. Adjust the image so that the overall brightness is desired.”

Contrast:

  • “The relative levels of light and dark. Adjust the image so that the overall contrast is desired.”

You may need to re-adjust these parameters when moving into different environments, especially when going from a light to dark area or vice versa.

How to change the PlayStation VR 2 Sense Controller adaptive trigger intensity

Both the left and right PlayStation VR 2 Sense Controllers use the same adaptive trigger features as the DualSense and DualSense Edge. If you would like to modify the intensity level of the L2 and R2 buttons, or disable the trigger resistance entirely, then you can take a look at this tutorial from Seeking Tech.

1. It is important to note that the PlayStation VR 2 Sense Controllers use the same adaptive trigger intensity settings as the DualSense.

So, for the first step, you need to head over to the home menu, which you can do by pressing and holding the PS button on the controller.

2. From the home menu, select the gear cog icon located on the top right side of the screen.

3. If done correctly, you should now be in the Settings screen. From there, you need head into Accessories.

4. After getting to the Accessories menu, you then need to select Controller (General) on the left column.

5. On the right side of the same screen, you should select Trigger Effect Intensity.

6. In the small pop-up menu, you will be able to select the following options:

  • The “Off” option will completely turn off the adaptive trigger feature. This will let you use the trigger normally without having to apply any extra pressure.
  • The “Weak” option will severely limit, but won’t completely disable, the adaptive intensity.
  • The “Medium” option should weaken the resistance pressure when compared to the standard option. With that said, it should still provide a notable effect.
  • The “Strong (Standard)” option is the default setting. This provides the strongest resistance if you want the full immersive experience when it comes to using your PlayStation VR 2 Sense Controllers.

7. Keep in mind that change you made to the Trigger Effect Intensity setting will also apply to the DualSense in addition to the PlayStation VR 2 Sense Controllers.

If you would like to change or revert it in the future when you are playing another virtual reality or flat-screen game, then you need to go back to the home screen menu of your PlayStation 5 or PlayStation 5 Digital Edition console and then head into Settings > Accessories > Controller (General) > Vibration Intensity.

How to avoid smashing the PS VR2 Sense controllers

It is pretty easy to break the left and right PlayStation VR2 Sense controllers if you aren’t careful enough with your surroundings while playing in virtual reality. To see what precautionary steps you can take to prevent these motion controls from breaking, you can take a look at this article from Seeking Tech.

1. For the first step, you should make sure that you have enough free airspace around you, especially if you are using a game that features the room scale play style.

If you are using the sitting play style, then avoid using a seat that has any arm rests as you could easily hit them in you aren’t careful during your play session.

Furthermore, you should also avoid playing the PlayStation VR2 if you are right underneath a ceiling light, ceiling fan or have a low roof as you could easily hit these objects as well. Instead, try to move to a more suitable location if possible.

2. You can also try limiting the play area so that it won’t be anywhere close to a wall, television set and other solid objects.

In order to edit your play area, you need to press the PS button on one of the Sense controllers, select the Quick Settings card and then select Set Play Area.

You can also go back to the home screen menu of your PlayStation 5 or PlayStation 5 Digital Edition console. From there, head over to Settings > Accessories > PlayStation VR2 > Set Play Area.

When setting up the Play Area, make sure you manually edit the space so that it is at least several feet away from a wall, television set and other solid objects. This is to ensure that, even if you punch the PlayStation VR2 Sense controllers through the virtual wall, you most likely be hitting air instead of anything solid.

3. You can also set the Boundary Display Sensitivity setting to High, which will make the detection more sensitive to your proximity. As a result, the game should end up pausing and the PS VR2 headset will automatically go into its “View Surroundings” mode where you can see where you are in the real world.

You can find this setting by pressing the PS button, selecting Quick Settings and then selecting Other Settings. Alternatively, you can go to the home screen of your PS5, select Settings, select Accessories and then select PlayStation VR2.

From the PlayStation VR2 menu, you need to select Boundary Display Sensitivity and then set it to High. Once you do, the out of bounds warning should appear a lot sooner.

4. Of course, it is very important that you always wear the wrist strap that is attached to both the left and right PlayStation VR2 Sense controllers

Otherwise, the motion controller can end up slipping out of your hands and either fall to the floor or be sent flying into a solid objects.

How to mute the PlayStation VR2 microphone

The PlayStation VR 2 features a built-in microphone. You can check out this step-by-step tutorial to see how you can mute this mic if you don’t want other players to hear you in voice chat.

How to mute the PS VR2 mic from the Control Center

By default, you need to use the Control Center in order to mute the PlayStation VR 2 microphone. In order to do so, you need to take the following steps:

1. While wearing the virtual reality headset, press the PS button in either the left or right PlayStation VR2 Sense controllers.

2. In the Control Center menu, select the Mic icon located at the bottom menu.

3. From the pop-up menu, you then need to make sure that the Mute option is enabled.

How to add the mute button to PlayStation VR2

If you would like to add the mute button to the PlayStation VR2, then you need to change the functionality of the Function Button. For the uninformed, this is the button is located at the bottom right-hand side of the virtual reality headset. By default, this button is set to View Surroundings, which allows you to see through the headset and into the real world in black and white.

You can change the Function button to mute the microphone on the VR headset instead by doing the following:

1. To start off, you need to head over to the PlayStation VR2 menu.

You can get there by pressing the PS button to open the Control Center. From there, select Quick Settings and then Other Settings.

Alternatively, you can go back to the home screen of your PlayStation 5 or PlayStation 5 Digital Edition system. Afterwards, go to Settings > Accessories > PlayStation VR2.

2. In this menu, you need to select Function Button Assignment from the VR Headset section.

3. From the Function Button Assignment menu, make sure that Mute Microphone is selected.

4. When you press the Function button on the PlayStation VR2, you should now be able to mute the virtual reality headset’s microphone.

5. To use the see through mode with the Function button set to Mute Microphone, you need to press the PS button to open the Control Center. From there, select the Quick Settings card. Finally, select View Surroundings.