PS4 Archives - Seeking Tech

How to disable injuries in MLB The Show 24

Injuries can derail a baseball season, in real life as well as in MLB The Show 24. Thankfully, you can turn off injuries in the videogame. To find out how you can properly do so, you can take a look at this guide at Seeking Tech.

1. Head into the Settings menu of MLB The Show 24.

2. Select Gameplay from the Settings screen.

3. Go to the General section if you aren’t there already.

4. Use the L2/R2, LT/RT or ZL/ZR buttons to change tabs until you get to the Rules section.

5. From there, set Injuries to Off.

6. Exit the Settings menu and select Apply Changes when asked.

How to turn on perfect umpiring in MLB The Show 24

by Kevin Chen

If you watch a lot of baseball, then you should know how bad umpiring can ruin a game. By default, the virtual umpires in MLB The Show 24 are imperfect. You can check out this guide at Seeking Tech to see how you can make every call perfect.

1. Go to the Settings menu in MLB The Show 24.

2. Select Gameplay

3. Switch tabs until you get to Rules.

You need to use the L2/R2 buttons on PlayStation LT/RT buttons on Xbox or ZL/ZR buttons on Switch to change tabs.

4. In the Rules tab, set Umpire Accuracy to Perfect so that you don’t have to worry about any missed calls when it comes to the strike zone.

5. Afterwards, set Umpire Close Plays to Perfect so that all there won’t be any mistakes when it comes to on-field calls.

6. Try to exit the Settings menu. When asked, select Apply Changes.

Can MLB The Show 24 be played offline?

by Kevin Chen

MLB The Show 24 recommends that you connect to its online server so that you can unlock full access to the game. With that said, the game is still playable offline.

If the servers are done, or your console can’t connect to the Internet, then the following modes and features will be locked out in this PlayStation 4, PlayStation 5, Nintendo Switch, Xbox One and Xbox Series baseball game:

Diamond Dynasty
Storylines
Challenge of the Week
Player Inventory and Packs
The Show Shop
Daily Login Bonuses
Daily Lineups

If you want to unlock these again, make sure you connect to the online server of MLB The Show 24.

How to enable automatic fielding and baserunning in MLB The Show 24

by Kevin Chen

If you simply want to pitch and hit in MLB The Show 24, then you can enable automatic fielding and baserunning. To find out how you can do so, you can take a look at this guide from Seeking Tech.

1. To start off, open up the Settings menu in The Show 24.

2. From there, select Gameplay.

3. On the Gameplay screen, switch over to Decisions.

You can change tabs by using the L2 and R2 buttons on PlayStation, RT and LT buttons on Xbox and ZL and ZR buttons on Switch.

4. In the Decisions section, you will be able to turn on the following:

Auto Fielding
Auto Throwing
Auto Baserunning
Auto Sliding
Auto INF Jump Reaction
Auto INF Dive Reaction

5. Exit the Settings menu. You should get a notice saying that the configurations have been modified.

Select the Apply Changes option.

How to automatically run in Unicorn Overlord

by Kevin Chen

By default, you have to hold down on a button in order to run in the overworld. If you want the characters to automatically run instead, then you can check out this guide at Seeking Tech.

1. Open the Options menu in the game.

2. From there, scroll down until you get to the Overworld section.

3. You should find the Auto-Run option here. Make sure you change it to On. You should see the following description if you do:

Run at all times, even when the run button is not pressed.

4. Exit the Options menu.

You should no longer have to press down on run button in order to sprint in Unicorn Overlord.

How to automatically pause in Unicorn Overlord

by Kevin Chen

By default, the enemies will start moving once you enter a stage in Unicorn Overlord. To see how you can automatically pause at the beginning of the level, you can take a look at this tutorial at Seeking Tech.

1. Head over to the Options menu if you haven’t done so already.

2. From there, move the cursor down to the Stage section.

3. Make sure you set Auto-Pause at Start of Stage to On.

The action should now be paused at the beginning of each level in Unicorn Overlord.

How to change voice language in Unicorn Overlord

by Kevin Chen

Unicorn Overlord supports both English and Japanese voice overs. To see how you can change the voice language in this tactical role-playing game, you can check out this guide at Seeking Tech.

1. Head to the Options menu.

2. In the System section, look for the Voice language setting.

3. Change it to your preferred language.

4. You can then exit the menus.

When you start playing Unicorn Overlord again, the voice acting should now be in your preferred language.

How to change aiming style in Contra: Operation Galuga

by Kevin Chen

Contra: Operation Galuga supports two different aiming styles. If you have a hard time aiming with one method, then you can try using the other. In order to do so, you can check out this guide at Seeking Tech.

1. Head over to the Options menu if you haven’t done so already. This can be done from the title screen or pause screen.

2. In Options, move the cursor down to Aiming Style.

3. You can then switch between the two styles: 360 Aim or 8 Directions.

4. Once you are done, exit the Options menu and then return to the game.

If you need to change the aiming style again, head back to the Options screen.

How to fix aiming issues in Foamstars

by Kevin Chen

When playing Foamstars with a controller, you may have a hard time aiming with the right analog stick. To see how you can potentially fix your targeting issues, you can take a look at this troubleshooting article from Seeking Tech.

1. To start off, make sure you have game mode enabled on your television or monitor as it will help with input lag reduction. Furthermore, you should also make sure that your controller is plugged into your console as it will further reduce input latency as well.

On the PlayStation 5, you also need to go to Settings > Accessories > Controller (General) > Communication Method > Use USB Cable.

On the PlayStation 4, you have to go to Settings > Devices > Controllers > Communication Method > Use USB Cable.

2. If you still have a hard time aiming, then you need to go to the Options menu in Foamstars, switch over to the Controls tab and then scroll down to the Camera Sensitivity During Shots setting.