How to disable voice chat in The Texas Chainsaw Massacre videogame

Voice Chat is enabled by default in The Texas Chainsaw Massacre videogame. If you would like to disable the audio communication feature of this asymmetrical survival horror title, you can take a look at this tutorial from Seeking Tech.

1. To start off, head to the Options menu from the title screen.

2. Inside of Options, make sure you are viewing the Audio tab. If not, then you need to change tabs.

You can switch tabs by using the L1 and R1 buttons on a PlayStation controller or LB and RB buttons on an Xbox controller.

3. From the Audio tab, move the menu cursor down to the Enable Voice Chat option.

By default, this is turned on. You can use the left analog or directional pad to switch it to Off.

Alternatively, you can use the Enable Voice Chat turned on and then turn off the Microphone if you want to hear other players but don’t want to talk to them. You can also lower the Voice Chat Volume if you want voice communications enabled.

4. Apply the changes and then exit the Options menu.

The next time you play a multiplayer match in The Texas Chainsaw Massacre game, your voice chat changes should be applied.

Recommended LG C3 settings for PS5, Xbox Series X and S

The LG C3 is a popular choice when it comes to a gaming television set capable of getting the most out of the PlayStation 5, Xbox Series X and Xbox Series S. To see what settings you should be using for this TV, you can check out this guide from Seeking Tech.

Model Numbers

This article should be based on the following model numbers from the C3 series:

  • 42″ LG C3 evo OLED TV (OLED42C3PUA)
  • 48″ LG C3 evo OLED TV (OLED48C3PUA)
  • 55″ LG C3 evo OLED TV (OLED55C3PUA)
  • 65″ LG C3 evo OLED TV (OLED65C3PUA)
  • 77″ LG C3 evo OLED TV (OLED77C3PUA)
  • 83″ LG C3 evo OLED TV (OLED83C3PUA)

Supported PS5 Features

When it comes to the PlayStation 5, the LG C3 supports Auto Low Latency Mode and HDR10.

In terms of frame rate, the TV is capable of playing PS5 games at up to 120 fps with Variable Refresh Rate support as long as it stays above 48 fps.

Supported Xbox Series X and Xbox Series S Features

For the Xbox Series X and Xbox Series S, the LG C3 supports Auto Low Latency Mode in addition to being capable of displaying games in HDR10 and Dolby Vision.

As for the frame rate, the Series X and Series S games can be played at up to 120 fps. When it comes to frame rate drops in these Xbox titles, the TV supports Variable Refresh Rate starting at 40 fps as well as Low Frame Rate Compensation.

Recommended Settings

To set up your LG C3 correctly for your PlayStation 5, Xbox Series X and/or Xbox Series S, you can take the following steps:

1. Connect your console to the OLED television if you haven’t done so already. Make sure you use the HDMI cable that came with your PS5, Series X or Series S for the best compatibility.

All four HDMI ports of the C3 are version 2.1; therefore, you can connect the console to any of them.

2. Open the TV settings of your LG C3 and then go to the General tab. From there, make sure that the Game Optimizer mode is turned on.

This picture setting will let you play games with low input lag. It will also turn on the Game Optimizer menu for the C3.

3. In the settings of your TV, you should also make sure that the HDMI Deep Color setting is set to 4K.

This will unlock the full HDMI 2.1 bandwidth for your console.

4. With the aforementioned Game Optimizer menu enabled, press the gear button on the TV remote to open it while the input of the screen is showing your connected console.

5. From there, make sure that the VRR & G-Sync setting is enabled.

6. In the same Game Optimizer menu, you should also set the Prevent Input Delay setting to Boost as well.

7. You should now be done with setting up your LG C3. With that said, you still have work to do on the console side. To start off, you should check to see if you have the right settings enabled on your PS5, Xbox Series X or Xbox Series S.

For the PlayStation 5, open the console’s Settings menu and then go to Screen and Video > Video Output. From there, you need to set the following options to Automatic:

  • VRR
  • 120 Hz
  • ALLM
  • 4K Transfer Rate
  • Deep Color Output
  • RGB Range

For the Xbox Series X and Xbox Series S, go to the console’s Settings menu and then navigate over to General > TV & Display Options > Video modes. You should then make sure that the following are enabled:

  • Allow Auto-Low Latency Mode
  • Allow Variable Refresh Rate
  • Allow 4K
  • Allow HDR10
  • Allow Dolby Vision
  • Dolby Vision for Gaming

7. You also need to calibrate your console’s HDR output for the LG C3.

On the PS5 side, you need to open the Settings menu and then select Screen and Video > Video Output > Adjust HDR.

If you have an Xbox Series X or Xbox Series S, then you need to open the console’s Settings menu and then select General > TV & display options > Calibrate HDR for Games.

Finally, select the on-screen instructions to calibrate the HDR brightness output for your C3 OLED.

How to fix missing DLC issues in The Texas Chainsaw Massacre videogame

If you downloaded a DLC pack for The Texas Chainsaw Massacre videogame, like the Execution Pack, but can’t find the downloadable content, then you can check out this troubleshooting article from Seeking Tech to see how you can potentially fix this issue.

1. For the first step, you can try restarting the game.

Keep in mind that, if you are playing the game on an Xbox Series S or Xbox Series S, then the game will automatically be suspended via Quick Resume. Therefore, you need to manually quit.

In order to do so, press the Xbox logo button on the controller to bring up the Xbox guide menu. From there, move the cursor over to The Texas Chainsaw Massacre and then press the Menu button. Finally, select the Quit option.

2. If you are playing the PC, PlayStation 4 or PlayStation 5 versions of the game, then you can try restoring your licenses.

To do so on the PS5, head over to the console’s Settings menu and then select Users and Accounts > Other > Restore Licenses.

On the PS4, go to Settings > Account Management > Restore Licenses.

For the PC, you need to go to the Steam licenses page.

3. If you still can’t find your missing DLC, then you can check its product page on the Microsoft Store, PlayStation Store or Steam Store. Make sure that you have purchased and downloaded the content from there.

4. If none of the aforementioned potential solutions have worked so far, then we recommend contacting the support team at Gun Interactive. You can do so with this link.

How to fix brightness issues in The Texas Chainsaw Massacre videogame

You may find that some environments in The Texas Chainsaw Massacre videogame to be too dark, too bright or washed out. To see how you can adjust the brightness for this multiplayer asymmetrical survival horror game, you can check out this guide from Seeking Tech.

1. If you are playing The Texas Chainsaw Massacre videogame with HDR enabled, then you can try calibrating your console’s HDR output.

To do so with the PS4 and PS4 Pro, you need to go to the Settings menu of your console and then select Sound and Screen > Video Output Settings > Adjust HDR.

On a PS5, head over to the system’s Settings menu and then select Screen and Video, > Video Output > Adjust HDR.

For the Xbox One and Xbox Series consoles, open the Settings menu and then go to General > TV & display options > Calibrate HDR for games.

Follow the on-screen instructions to calibrate the HDR output.

2. You can also adjust the in-game brightness. To do so, head over to the Options menu from the title screen. From there, make your way to the Video tab and then select Brightness Calibration.

In the new screen, you will see a slider with the following description:

Adjust brightness until the darkest symbol is barely visible.

Follow the on-screen directions.

3. If you still find that The Texas Chainsaw Massacre game is still too dark, too bright or washed out, then we suggest taking a look at the settings of your television set or monitor.

You should be able to adjust the brightness, contrast and/or saturation level of your screen in order to improve your visibility.

4. Some screens are better at handling brightness output when compared to others. So, if possible, you can try playing The Texas Chainsaw Massacre on a different TV or monitor.

How to disable vibration in The Texas Chainsaw Massacre videogame

Controller vibration is enabled by default in PC, PlayStation 4, PlayStation 5, Xbox One and Xbox Series versions of The Texas Chainsaw Massacre videogame.

If you find that the rumble is too annoying and/or distracting, especially when browsing through the menus, then you can check out this Seeking Tech tutorial to see how you can disable this feature.

1. For the first step, you need to enter the Options menu from the title screen in The Texas Chainsaw Massacre.

2. Inside of Options, you need to make your way to the Game tab.

On a DualShock 4 or DualSense, you will be able to change tabs by using the L1 and R1 buttons. On an Xbox One or Xbox Series controller, you can change tabs with the LB and RB buttons.

3. From the Game tab in the Options menu, move the cursor down to Vibration Intensity.

4. By default, the Vibration Intensity setting is set to High. You can use the directional pad or left analog stick to change it to Medium, Low or Off.

Once you change this setting, you should notice the difference right away when browsing through the menus.

Samsung Q60C wall mount specs

If you bought the 2023 Samsung Q60C and would like to put it up on a wall, then you can check out this guide at Seeking Tech.

Screen Sizes

This article will cover the following model numbers of the Q60C:

32″:

  • QN32Q60CAF
  • QN32Q60CAFXZA

43″:

  • QN43Q60CAF
  • QN43Q60CAFXZA

50″:

  • QN50Q60CAF
  • QN50Q60CAFXZA

55″:

  • QN55Q60CAF
  • QN55Q60CAFXZA

65″:

  • QN65Q60CAF
  • QN65Q60CAFXZA

70″:

  • QN70Q60CAF
  • QN70Q60CAFXZA

75″:

  • QN75Q60CAF
  • QN75Q60CAFXZA

85″:

  • QN85Q60CAF
  • QN85Q60CAFXZA

Q60C Dimensions (without Stand)

Dimensions without Stand (in inches):

  • 32″ Q60C: 28.6 inches x 16.8 inches x 1.2 inch
  • 43″ Q60C: 38.0 inches x 22.0 inches x 1.0 inch
  • 50″ Q60C: 44.0 inches x 25.4 inches x 1.0 inch
  • 55″ Q60C: 48.5 inches x 27.9 inches x 1.0 inch
  • 65″ Q60C: 57.1 inches x 32.7 inches x 1.0 inch
  • 70″ Q60C: 61.4 inches x 35.5 inches x 1.0 inch
  • 75″ Q60C: 66.0 inches x 37.8 inches x 1.0 inch
  • 85″ Q60C: 74.8 inches x 42.7 inches x 1.1 inch

Dimensions without Stand (in millimeters):

  • 32″ Q60C: 726 mm x 427 mm x 30.5 mm
  • 43″ Q60C: 965 mm x 559 mm x 25 mm
  • 50″ Q60C: 1118 mm x 645 mm x 25 mm
  • 55″ Q60C: 1232 mm x 709 mm x 25 mm
  • 65″ Q60C: 1450 mm x 831 mm x 25 mm
  • 70″ Q60C: 1560 mm x 902 mm x 25 mm
  • 75″ Q60C: 1676 mm x 960 mm x 25 mm
  • 85″ Q60C: 1900 mm x 1085 mm x 25 mm

Dimensions without Stand (in centimeters):

  • 32″ Q60C: 72.6 cm x 42.7 cm x 3.1 cm
  • 43″ Q60C: 96.5 cm x 55.9 cm x 2.5 cm
  • 50″ Q60C: 111.8 cm x 64.5 cm x 2.5 cm
  • 55″ Q60C: 123.2 cm x 70.9 cm x 2.5 cm
  • 65″ Q60C: 145.0 cm x 83.1 cm x 2.5 cm
  • 70″ Q60C: 156.0 cm x 90.2 cm x 2.5 cm
  • 75″ Q60C: 167.6 cm x 96.0 cm x 2.5 cm
  • 85″ Q60C: 190.0 cm x 108.5 cm x 2.5 cm

Q60C Weight (without Stand)

Weight without Stand (in pounds):

  • 32″ Q60C: 11.7 lbs.
  • 43″ Q60C: 18.5 lbs.
  • 50″ Q60C: 25.4 lbs.
  • 55″ Q60C: 34.2 lbs.
  • 65″ Q60C: 46.1 lbs.
  • 70″ Q60C: 62.8 lbs.
  • 75″ Q60C: 69.2 lbs.
  • 85″ Q60C: 91.5 lbs.

Weight without Stand (in kilograms):

  • 32″ Q60C: 5.3 kg
  • 43″ Q60C: 8.4 kg
  • 50″ Q60C: 11.5 kg
  • 55″ Q60C: 15.5 kg
  • 65″ Q60C: 21.0 kg
  • 70″ Q60C: 28.5 kg
  • 75″ Q60C: 31.4 kg
  • 85″ Q60C: 41.5 kg

Q60C VESA Mounting Pattern

In order to install the wall mount to your TV, you need to use the four mounting screw holes located on the back of your Q60C. The vertical and horizontal distances between these screws are known as the VESA Mounting Pattern.

You can find the pattern for each screen size below:

  • 32″ Q60C: 100 mm x 100 mm
  • 43″ Q60C: 200 mm x 200 mm
  • 50″ Q60C: 200 mm x 200 mm
  • 55″ Q60C: 200 mm x 200 mm
  • 65″ Q60C: 400 mm x 300 mm
  • 70″ Q60C: 400 mm x 300 mm
  • 75″ Q60C: 400 mm x 400 mm
  • 85″ Q60C: 600 mm x 400 mm
VESA Mounting Pattern (example from different TV).

Q60C Mounting Screw Type

When it comes to the mounting screw type, Samsung recommends that you use the M4 with a length between 19 mm to 22 mm for the 32” Q60C.

For the bigger versions of this TV model, the company suggests using the M8 screw type with a length between 11 mm to 13 mm.

What wall mounts are compatible with the Samsung Q60C?

For a wall mount to be compatible with the Q60C, it must match the VESA Mounting Pattern on the back of the television set.

The 32-inch screen size features a 100 mm x 100 mm pattern. The 43-inch, 50-inch and 55-inch versions all use 200 mm x 200 mm. If you have a 65-inch or 70-inch set, then you have to use a mount that is compatible with 400 mm x 300 mm. The 75-inch model has a 400 mm x 400 mm pattern while the 84-inch screen size options utilizes the 600 mm x 400 mm pattern.

The same wall mount should also be strong enough to hold the weight of the television set. The Q60C series can weigh as much as 91.5 lbs. or 41.5 kg.

If you are looking for specific fixed, tilting or full motion wall mount recommendations for your Q60C, then you can check out this post.

How to fix Everspace 2 brightness issues

You can find some areas in Everspace 2 to be a little too dark, overly bright or washed out. To see how you can fix these brightness issues in the space combat game, you can check out this troubleshooting article from Seeking Tech.

1. If you are playing Everspace 2 in HDR, then it is important to note that this feature is currently not working as intended. In fact, the development team has stated that they are planning to remove HDR support for the PC version. Therefore, it is best that you turn off HDR and play this game in SDR instead.

If you are playing the game on a PlayStation 5, Xbox Series X or Xbox Series S, then we suggest that you turn off the Auto HDR setting.

On the PS5, you need to go to the console’s Settings menu and then select Screen and Video > Video Output > HDR > On When Supported.

On the Xbox Series X or Xbox Series S, open the console’s Settings menu and then select General > TV & display options > Video modes. From there, make sure that Auto HDR is not selected.

2. You should also make sure that Auto HDR is disabled on your television set or monitor as well.

3. If the brightness in Everspace 2 still looks off after disabling HDR, then you can open the in-game Settings menu.

From the Graphics tab of the Settings screen, you should be able to adjust the Gamma level, which is set to 0.50 by default.

4. You can also adjust the brightness and contrast levels of your television set or monitor if you need some additional fine tuning.

How to disable camera shake in Everspace 2

During certain actions in Everspace 2, the in-game camera will shake. If you find that the shaking is too distracting and/or making things hard to see in this space combat game, then you can check out this tutorial from Seeking Tech to see how you can disable it.

1. For the first step you need to head over to the Settings screen in the videogame. This can be done from either the main menu or pause menu.

2. In Settings, head over to the Game tab.

You can change tabs by pressing the L1 and R1 buttons if you are using a DualSense controller or LB and RB buttons if you are using an Xbox Series controller.

3. From the Game tab, scroll all the way down.

4. Move the menu cursor to Camera Shakes, which should be the very last option in the Display section.

5. By default, the Camera Shakes setting is set to All Enabled. You will be able to change this visual effect to important events only or turn it off completely.

6. Once you are done making the change, exit the Settings screen.

When you start playing Everspace 2 again, you should notice the reduction of shaking when it comes to the in-game camera.

How to turn off damage and XP numbers in Everspace 2

When you attack enemies in Everspace 2, you will see numbers show up. If you find that this indicators to be too distracting during gameplay, then you can check out this Seeking Tech guide to see how you can disable them.

1. To start off, open the Settings menu from either the title or pause screen in Everspace 2 if you haven’t done so already.

2. Once you get to Settings, you need to navigate over to the Game tab.

If you are playing with a PlayStation controller, then you can use the L1 and R1 button to change tabs. If you are using an Xbox themed gamepad, then you can use the LB and RB buttons.

3. Once you are in the Game tab, scroll down to the Display section.

4. In the Display section, you will find the Show Damage Numbers setting, which is set to On by default.

To stop these numbers from showing up when you hit your enemies, make sure that this is set to Off.

5. From the same Display section, you will also find the Show XP Numbers setting, which is also set to On by default.

If you don’t want to see the experience points you earned after defeating an enemy, then you should make sure that this is set to Off.

6. Once you are done turning off these numbers, exit the Settings menu and then return to the game.

How to switch to left-handed controls in Everspace 2

Everspace 2 allows you to switch the controls around if you are left-handed. To find out how you can change the button layout to be left hand dominant, you can check out this tutorial from Seeking Tech.

1. For the first step, you need to head over to the Settings menu in Everspace 2. This can be done from either the main menu or pause menu in the space RPG.

2. Once you get to Settings, you need to make your way to the Input tab.

You can change tabs on the PlayStation 5 version by using the L1 and R1 buttons on the DualSense. If you are playing the Xbox Series X or Xbox Series S version, then you need to use the LB and RB buttons.

3. From the Input tab, select Change Preset from the Preset section.

4. On the next screen, you should find the button layout.

Here, you can use the L1 and R1 buttons or LB or RB buttons to switch between Scheme A (which is recommended for players who are familiar with first-person shooters) or Scheme B (which is recommended for those who play racing game or the first Everspace game).

In this menu, you can also switch the controls around. On a PlayStation controller, you need to press and hold the Square button. On an Xbox gaempad, you need to press and hold the X button.

5. After changing the button layout, exit the settings menu and then return to playing Everspace 2.