2021 Insignia F20 wall mount specs

In 2021, Insigna released a new line of F20 HD television sets. If you want to mount these HDTVs on a wall, then you can check out this guide to find the best options.

Mounting Specifications

You can check out the mounting specifications for the 24”, 32” and 42” 2021 Insignia F20 televisions below:

Insignia 24-inch F20 Series Smart Full HD Fire TV (NS-24F202NA22)

  • Dimensions without Stand: 21.5 inches x 12.6 inches x 3.4 inches
  • Weight without Stand: 6.1 pounds
  • VESA Wall Mount Standard: 100 mm x 100 mm

Insignia 32-inch F20 Series Smart Full HD Fire TV (NS-32F202NA22)

  • Dimensions without Stand: 28.7 inches x 17 inches x 3.1 inches
  • Weight without Stand: 9 pounds
  • VESA Wall Mount Standard: 100 mm x 100 mm

Insignia 42-inch F20 Series Smart Full HD Fire TV (NS-42F201NA22)

  • Dimensions without Stand: 37.4 inches x 21.1 inches x 3.2 inches
  • Weight without Stand: 13 pounds
  • VESA Wall Mount Standard: 200 mm x 100 mm

For the uninformed, the VESA Wall Mount Standard measures the horizontal and vertical distances of the four mounting screw holes located on the back of the F20.

VESA Mounting Pattern (example from different TV).

Compatible fixed mount

If you are looking for a simple mount that won’t take up too much space, then we recommend checking out the PSSL1 Fixed TV Wall Mount Bracket from PERLESMITH. With this product installed with your 2021 Insignia F20, the television set will sit at just 0.8 inch away from the wall.

The PSSL1 fits the 100 mm x 100 mm and 200 mm x 100 mm VESA Wall Mount Standards in addition to being able to hold a maximum of 66 pounds. So, this product should be compatible with the 2021 24-inch, 32-inch and 42-inch F20 Series Smart Full HD Fire TV.

When it comes to supported walls, this PERLESMITH mounting bracket can be installed on concrete as well as a single wood stud.

You can purchase the fixed mount for your Insignia F20, if you are interested, on Amazon with the following link:

Compatible tilt mount

You might also want to consider tilting your 2021 F20 as doing so will prevent screen glares and get you better viewing angles. If you are interested in doing so, then we suggest picking up the PIMTK1 Tilt TV Wall Mount Bracket from Pipishell.

With this mount, your F20 television screen will be sitting at 1.3 inch away from the wall. The extra bit of space will give you room to tilt the TV downwards at a maximum of 8 degrees.

The PIMTK1 has a VESA Wall Mount Standard range from 100 mm x 100 mm to 400 mm x 400 mm. Since it can hold up to 99 pounds, then it should support all three screen sizes of the Insignia F20 Series Smart Full HD Fire TV series.

This Pipishell tilting mount can be installed on a brick wall, concrete wall or wall with wood studs that are 8 inches to 16 inches apart. This product also includes a small bubble level tool.

If you are interested, you can purchase our recommended mounting bracket on Amazon with the following link:

Compatible full motion mount

If you prefer to watch your 2021 Insignia F20 from many different viewing arrangements, then you might want to consider getting a mounting bracket that is capable of swiveling. If you are interested in one, then we recommend picking up the ‎PISF1 Full Motion TV Monitor Wall Mount Bracket from Pipishell.

When paired with this mount, you television will sit at 2.2 inches away from the wall when fully retracted. You can then extend the TV at a maximum of 14.5 inches away from the wall, giving you room to swivel the screen at up to 90 degrees to the left or up to 90 degrees to the right.

Furthermore, you can also tilt your Insignia F20 downwards at a maximum of 15 degrees or upwards at a maximum of 5 degrees. Last but not least, you can even rotate the screen at up to 360 degrees as you can choose between landscape or portrait orientations.

The PISF1 is compatible with the 100 mm x 100 mm as well as the 200 mm x 200 mm VESA Wall Mount Standards. With a weight capacity of up to 44 pounds, this mount should support all the screen sizes of the 2021 Insignia F20 series.

As for installation, you can put this mount on a brick wall, concrete wall or a wall with a wooden stud.

You can purchase our recommended swiveling mount, if you are interested, on Amazon with the following link:

Hisense A6G wall mount specs

The A6G is a new 4K Android television set released by Hisense in 2021.

You can check out this guide to find what are the most suitable options when it comes to mounting the A6G TV set on a wall.

Mounting Specifications

You can check out the mounting specifications for the A6G below:

2021 43″ Class Hisense A6G Series 4K UHD Android Smart TV (43A6G)

  • Dimensions without Stand: 37.9″ x 22″ x 2.9″
  • Weight without Stand: 15.0 lbs.
  • VESA Mount Pattern: 200 mm x 300 mm
  • Wall Mount Screw Size: M6

2021 50″ Class Hisense A6G Series 4K UHD Android Smart TV (50A6G)

  • Dimensions without Stand: 44″ x 25.4″ x 2.9″
  • Weight without Stand: 21.6 lbs.
  • VESA Mount Pattern: 200 mm x 300 mm
  • Wall Mount Screw Size: M6

2021 55″ Class Hisense A6G Series 4K UHD Android Smart TV (55A6G)

  • Dimensions without Stand: 48.59″ × 28″ × 2.9″
  • Weight without Stand: 24.9 lbs.
  • VESA Mount Pattern: 200 mm x 300 mm
  • Wall Mount Screw Size: M6

2021 60″ Class Hisense A6G Series 4K UHD Android Smart TV (60A6G)

  • Dimensions without Stand: 53.3″ x 30.7″ x 2.9″
  • Weight without Stand: 32.0 lbs.
  • VESA Mount Pattern: 200 mm x 300 mm
  • Wall Mount Screw Size: M6

2021 65″ Class Hisense A6G Series 4K UHD Android Smart TV (65A6G)

  • Dimensions without Stand: 57.2″ × 32.8″ × 2.9″
  • Weight without Stand: 36.4 lbs.
  • VESA Mount Pattern: 400 mm x 300 mm
  • Wall Mount Screw Size: M6

2021 70″ Class Hisense A6G Series 4K UHD Android Smart TV (70A6G)

  • Dimensions without Stand: 62.1″ × 34.8″ × 3.3″
  • Weight without Stand: 46.3lbs
  • VESA Mount Pattern: 400 mm x 300 mm
  • Wall Mount Screw Size: M6

2021 75″ Class Hisense A6G Series 4K UHD Hisense Android Smart TV (75A6G)

  • Dimensions without Stand: 66.0″ × 38.0″ × 3.3″
  • Weight without Stand: 57.3 lbs.
  • VESA Mount Pattern: 400 mm x 300 mm
  • Wall Mount Screw Size: M6

For the uninformed, the VESA Mount Pattern measures the horizontal and vertical distances between the four mounting screw holes located on the back of the A6G.

VESA Mounting Pattern (example from different TV).

Compatible fixed mount

If you are planning to simply mount your A6G on a wall, then we recommend checking out the Mount-It! Low-Profile Large TV Mount, which has a model number of MI-305L.

This product is designed so that your LG 4K TV will be just 1” away from the wall. As a result, you will get a slim profile look.

The MI-305L has a maximum VESA horizontal distance of 850 mm as well as a maximum VESA vertical distance of 450 mm. As it can also hold up to 220 pounds, this mount should be compatible with all screen sizes of the Hisense A6G Series 4K UHD Android Smart TV.

The MI-305L can be installed on a brick wall, concrete wall as well as a wall with studs that are 8”, 16” or 24” apart. This product includes a built-in bubble level in addition to a security bar.

You can purchase the recommended fixed wall mount, if you are interested, on Amazon with the following link:

Compatible tilt mount

You might also want to consider a tilting mount as it can prevent bad viewing angles and screen glares for your A6G. If you are interested in one, then we suggest taking a look at the Mounting Dream Tilt TV Wall Mount, which has a model number of MD2165-LK.

With this mounting bracket, your LG screen will be sitting at just 1.6” away from the wall. The distance gives you enough space to tilt the television at a maximum of 20 degrees downwards.

The MD2165-LK has a maximum horizontal VESA distance of 600 mm and a maximum vertical VESA distance of 400 mm. With a weight capacity of 132 pounds, this mount should work with every screen size from the LG A6G series.

The Mounting Dream mounting bracket can be installed on concrete, wall with studs that are 16” apart or wall with studs that are 24” apart. The product includes a bubble level tool.

You can purchase this recommended tilting mount, if you are interested, with the following Amazon link:

Compatible articulating mount

If you want to watch your A6G television sets from many different viewing arrangements, then you should get an articulating mount. If you are interested in doing so, then we recommend getting the Pipishell Full Motion Dual Articulating TV Wall Mount Bracket, which has a model number of PILFK1.

When fully retracted, your A6G will be 3” away from the wall. You can then extend the PILFK1 to a maximum of 15.4” away from the wall.

The distance will give you room to swivel a maximum of 60 degrees horizontally to the left or a maximum of 60 degrees horizontally to the right. You can also tilt your LG 4K screen a maximum of 10 degrees downwards or a maximum of 10 degrees upwards.

The ‎PILFK1 is compatible with a maximum horizontal VESA distance of 600 mm in addition to a maximum vertical VESA distance of 400 mm. Since it can hold up to 132 pounds, this mount should support every screen size of the A6G.

For installation, you can install the PILFK1 on brick, concrete or studs that are 16” apart. After installation, you can level your TV at up to 3 degrees. The product includes a bubble level as well as several cable ties.

If you are interested, you can purchase the recommended articulating mount on Amazon with the following link:

LG UP7000 wall mount specs

The UP7000 is a new budget friendly 4K television set from LG. You can check out this guide at Seeking Tech to find the most suitable wall mounting options for this television model.

Mounting Specifications

You can take a look at the mounting specs for every screen size of the UP7000 model below:

LG UHD 70 Series 43 inch Class 4K Smart UHD TV (43UP7000PUA)

  • Dimensions without Stand: 38.1″ x 22.3″ x 3.5″
  • Weight without Stand: 15.7 lbs.
  • VESA Mount Distance: 300 mm x 300 mm

LG UHD 70 Series 50 inch Class 4K Smart UHD TV (50UP7000PUA)

  • Dimensions without Stand: 44.2″ x 25.7″ x 3.5″
  • Weight without Stand: 20.9 Ibs.
  • VESA Mount Distance: 300 mm x 300 mm

LG UHD 70 Series 55 inch Class 4K Smart UHD TV (55UP7000PUA)

  • Dimensions without Stand: 48.7″ x 28.3″ x 3.5″
  • Weight without Stand: 24.7 lbs.
  • VESA Mount Distance: 300 mm x 300 mm

LG UHD 70 Series 65 inch Class 4K Smart UHD TV (65UP7000PUA)

  • Dimensions without Stand: 57.5″ x 33.2″ x 3.5″
  • Weight without Stand: 37.9 lbs.
  • VESA Mount Distance: 400 mm x 300 mm

For the uninitiated, the VESA Mount Distance measures the horizontal and vertical spacings between the four mounting screw holes located on the back of the UP7000.

VESA Mounting Pattern (example from different TV).

Compatible fixed wall mount

If you are looking for a fixed wall mount to simply keep your UP7000 in place on a wall, then we recommend checking out the Mount-It! Low-Profile Large TV Mount (which has a model number of MI-305L).

When installed with this bracket, your LG UP7000 will be sitting at just 1 inch away from the wall, which provides a low-profile look.

The MI-305L has a VESA Mount Distance range of 100 mm x 100 mm to 850 mm x 450 mm, which includes the 300 mm x 300 mm and 400 mm x 300 mm patterns. As it has a maximum weight capacity of 220 pounds, this mount should be compatible with all screen sizes of the 2021 LG UHD 70 series.

This mount can be installed on brick, concrete or 16” studs. The product includes a built-in bubble level tool in addition to a security lock bar.

If you are interested, you can purchase the recommended fixed mounting bracket on Amazon with the following link:

Compatible tilt wall mount

If you are planning to mount your UP7000 high up on the wall, then you may potentially end up with bad viewing angles and screen glares. In this case, we suggest getting a tilting mount such as the Mounting Dream Tilt TV Wall Mount TV Bracket (which has a model number of MD2165-LK).

With this bracket, your LG 4K Smart UHD TV will be sitting at 1.6” away from the wall. You will also get the ability to tilt the screen at a maximum of 20 degrees downwards.

The MD2165-LK has a VESA Mount Distance range of 200 mm x 150 mm to 600 mm x 400 mm in addition to being able to support weights of up to 132 pounds. So, it should support all the screen sizes from the 2021 LG UHD 70 series.

You should be able to install this bracket on concrete in addition to studs with spacings that are 16”, 18” or 24” apart.

You can buy the recommend tilting mount, if you are interested, with the following Amazon link:

Compatible articulating wall mount

If you prefer to use your UP7000 from many different viewing arrangements, then you should consider getting a mount that can swivel. If you are interested in one, then we suggest picking up the VideoSecu Full Motion Articulating TV Wall Mount Bracket (which has a model number of MW380B5).

When the mount is fully retracted, your LG TV will be sitting at 3” away from the wall. You can then extend the screen at a maximum of 14” away from the wall.

The extension lets you swivel your 2021 LG UHD 70 TV at up to 160 degrees horizontally, which is a maximum of 80 degrees to the left or a maximum of 80 degrees to the right. You can also tilt the screen at a maximum of 12 degrees downwards or a maximum of 5 degrees upwards.

The MW380B5 supports a VESA Mount Distance range of 150 mm x 100 mm to 684 mm x 400 mm along with being able to hold up to 125 pounds. So, it should be compatible with every screen size of the UP7000.

This mount can be installed on studs that are 16” apart from one another. After installation, you will be able to level your screen at a maximum of 3 degrees.

You can purchase the recommend swiveling mount, if you are interested, on Amazon with the following link:

Is the Q70A a suitable TV for PS5, Xbox Series X and other consoles?

The Q70A is a new Samsung QLED television set. So, how does this 2021 TV fare when it comes to displaying videogames on the PlayStation 5, Xbox Series X, Xbox Series S as well as other home consoles?

You can find out in this guide from Seeking Tech.

Quick Summary

The Q70A is a pretty good television set for the PS5, Xbox Series X and Xbox Series S. The new Samsung TV includes a HDMI 2.1 port in addition to supporting features like 120 fps and Variable Refresh Rate. It also features extremely low input lag in game mode.

The HDR capabilities for the Q70A may not be great due to the lack of local dimming zones and only passable brightness levels, but it is good enough to show off the advantages of using the high-dynamic color range.

The only major disadvantage of the Q70A model is the lack of support for the Dolby Vision HDR format, which is being used for the Xbox Series X and Xbox Series S.

Q70A Screen Sizes

The Q70A is available in the following screen sizes:

  • 55″: QN55Q70AAFXZA
  • 65″: QN65Q70AAFXZA
  • 75″: QN75Q70AAFXZA
  • 85″: QN85Q70AAFXZA

Does the Q70A have HDMI 2.1 ports?

The Q70A comes with four HDMI ports, the first three of which is HDMI 2.0 while the last one is HDMI 2.1.

HDMI 2.0 is good enough to play videogames at 60 frames per second in a maximum resolution of 4K on new consoles. You should also be able to be games at 120 frames per second in a maximum resolution of 1440p.

With HDMI 2.1 you will be able to play at 120 frames per second in a maximum resolution of 4K.

Legacy Consoles Support

The Q70A does not have any composite or component inputs. So, you have to use an adapter if you want to plug in consoles like the PS1, PS2, Nintendo 64, Gamecube, Wii, Saturn, Dreamcast and Xbox.

Since this model does have an antenna/cable input, you should be able to directly connect older systems such as the Nintendo Entertainment System, SNES and Sega Genesis.

HDR Features

The Q70A is compatible with HDR10 and HDR10+ formats in addition to featuring a wide color gamut. This model does not support the Dolby Vision format or come with any local dimming zones.

HDR10 is used by the PS4, PS4 Pro, PS5, Xbox One S, Xbox One X, Xbox Series S and Xbox Series X.

The two Xbox Series systems also support the Dolby Vision format.

Q70A’s HDR Brightness in Game Mode

In order to highlight the advantages of HDR, we recommend getting a television that is capable of displaying at least 500 nits of brightness when HDR is enabled.

The Samsung Q70A is able to achieve this minimum threshold at every scene tested by RTINGS.com with the exception of HDR Peak 2% Window and HDR Sustained 2% Window.

Overall, the HDR brightness levels of the Q70A is good enough but not all that great.

You can check out the test results below (via RTINGS):

  • Real Scene Highlight: 560 nits
  • HDR Peak 2% Window: 257 nits
  • HDR Peak 10% Window: 587 nits
  • HDR Peak 25% Window: 585 nits
  • HDR Peak 50% Window: 584 nits
  • HDR Peak 100% Window: 584 nits
  • HDR Sustained 2% Window: 252 nits
  • HDR Sustained 10% Window: 584 nits
  • HDR Sustained 25% Window: 582 nits
  • HDR Sustained 50% Window: 582 nits
  • HDR Sustained 100% Window: 582 nits
  • HDR ABL: 0.053

Adaptive Sync Support

When it comes to adaptive sync support (which helps improve the frame rate to prevent stutters and tearing), the Q70A is capable of FreeSync and Variable Refresh Rate but not GSYNC.

Variable Refresh Rate is currently being used by the Xbox Series S and Xbox Series X. The same feature is expected to also come to the PlayStation 5.

Q70A’s Input Lag

The Q70A has excellent input lag reduction when you used its game mode. According to tests done by RTINGS, this model has a maximum latency of 11.0 ms at the 60 Hz, 120 Hz and VRR refresh rates in 1080p, 1440p and 4K resolutions.

We recommend less than 30 ms of lag if you don’t want an unresponsive gaming experience. So, the Q70A is an excellent TV in that regard.

You can find the input lag test results below (via RTINGS):

  • 1080p resolution and 60 Hz refresh rate (Game Mode Enabled): 11.0 ms
  • 1080p resolution and 120 Hz refresh rate (Game Mode Enabled): 5.6 ms
  • 1440p resolution and 60 Hz refresh rate (Game Mode Enabled): 10.2 ms
  • 1440p resolution and 120 Hz refresh rate (Game Mode Enabled): 5.6 ms
  • 4K resolution and 60 Hz refresh rate (Game Mode Enabled): 10.0 ms
  • 4K resolution and 60 Hz refresh rate + 10 bit HDR (Game Mode Enabled): 10.9 ms
  • 4K resolution and 60 Hz at 4:4:4: 10.0 ms
  • 4K resolution and 120 Hz refresh rate (Game Mode Enabled): 5.6 ms
  • 1080p resolution and 60 Hz refresh rate (Game Mode Disabled): 83.3 ms
  • 4K resolution and 60 Hz refresh rate (Game Mode Disabled): 70.0 ms
  • 4K resolution and 60 Hz refresh rate With Interpolation: 20.9 ms

Is the Q70A good for PS5, Xbox Series X and Xbox Series S?

The Q70A is a pretty good television set for the new consoles as it comes with a HDMI 2.1 port in addition to support for 120 fps and Variable Refresh Rate. This model also features extremely low input lag when its game mode is enabled.

Although it does not have any local dimming zones, its HDR brightness level is still passable.

The only major downside is the lack of support for the Dolby Vision HDR format.

Is the Q70A good for Switch, PS4, PS4 Pro, Xbox One, Xbox One S and Xbox One X?

The aforementioned HDR pros and cons also apply to HDR-enabled games on the PS4, PS4 Pro, Xbox One S and Xbox One X.

Of course, the great input lag reduction also applies to older HDMI consoles, including the PlayStation 3, PlayStation 4, Xbox 360, Xbox One, Nintendo Wii U and Nintendo Switch.

Is the Q60A a suitable TV for PS5, Xbox Series X and other consoles?

The Q60A is one of several Samsung 4K television sets released in 2021. So, how does this TV fare when it comes to playing games on the PlayStation 5, Xbox Series X, Xbox Series S as well as other gaming consoles?

You can find out in this Seeking Tech guide.

Quick Summary

The Q60A does not come with any HDMI 2.1 ports or local dimming zones. The 2021 television set also does not support 120 fps, 1440p, Dolby Vision or Variable Refresh Rate.

With subpar HDR brightness levels as well, the Q60A is lacking when it comes to taking advantage of the graphical features of the new PS5, Xbox Series X and Xbox Series S consoles.

The TV does have low input lag when you use its game mode, however. So, it is a decent set to play non-HDR games.

Q60A Screen Sizes

The Samsung Q60A is available in the following screen sizes:

  • 43″: QN43Q60AAFXZA
  • 50″: QN50Q60AAFXZA
  • 55″: QN55Q60AAFXZA
  • 60″: QN60Q60AAFXZA
  • 65″: QN65Q60AAFXZA 
  • 70″: QN70Q60AAFXZA
  • 75″: QN75Q60AAFXZA
  • 85″: QN85Q60AAFXZA

Does the Q60A have HDMI 2.1 ports?

The Samsung Q60A does not have any HDMI 2.1 ports. Instead, this television comes equipped with three HDMI 2.0 ports.

HDMI 2.0 will allow you to play games at up to 60 frames per second in 1080p and 4K.

You won’t be able to use the Q60A to play games at 120 frames per second or 1440p.

Legacy Consoles Support

The Q60A does not include a composite input, which means that you need to purchase an adapter to connect consoles like the PS1, PS2, Nintendo 64, GameCube, Wii and Xbox.

This Samsung 2021 TV does include a cable/antenna tuner that you can use to directly connect retro systems like the NES, Super NES and Sega Genesis.

HDR Features

The Q60A supports HDR10, HDR10+ and wide color gamut. The TV does not support Dolby Vision nor does it come with any local dimming zones.

The HDR10 format is used by consoles like the PS4, PS4 Pro, PS5, Xbox One S, Xbox One X, Xbox Series S and Xbox Series X.

The Xbox Series consoles also supports Dolby Vision.

Q60A’s HDR Brightness in Game Mode

The Q60A is a little below average when it comes to HDR brightness levels. For HDR to begin to stand out, we recommend getting a television that can produce at least 500 nits.

According to tests done by RTINGS.com, Q60A isn’t able to hit that minimum threshold in any of the scenarios that were tested. Overall, the 2021 Samsung television has a Real Scene Highlight of 468 nits.

You can check out the HDR brightness level test results for the Q60A below (via RTINGS):

  • Real Scene Highlight: 468 nits
  • HDR Peak 2% Window: 214 nits
  • HDR Peak 10% Window: 489 nits
  • HDR Peak 25% Window: 488 nits
  • HDR Peak 50% Window: 487 nits
  • HDR Peak 100% Window: 487 nits
  • HDR Sustained 2% Window: 211 nits
  • HDR Sustained 10% Window: 488 nits
  • HDR Sustained 25% Window: 487 nits
  • HDR Sustained 50% Window: 487 nits
  • HDR Sustained 100% Window: 486 nits
  • HDR ABL: 0.054

Adaptive Sync Support

The Q60A does not support any of the three adaptive sync features: FreeSync, GSYNC orVariable Refresh Rate. These are used to prevent any stutters and tearing associated with games that have inconsistent frame rates.

Variable Refresh Rate is currently supported by the Xbox Series S and X. The same adaptive sync feature is also expected to be added to the PlayStation 5 in the future.

Q60A’s Input Lag

The Samsung Q60A has excellent input lag reduction when you use its game mode.

For a low-latency gaming experience, we suggest getting a television set that has less than 30 ms of lag.

According to tests done by RTINGS, this Samsung TV model was able to fall way below that upper limit at 1080p as well as 4K resolution.

You can find the input lag test results for the Q60A below (via RTINGS):

  • 1080p resolution and 60 Hz refresh rate (Game Mode Enabled): 10.1 ms
  • 4K resolution and 60 Hz refresh rate (Game Mode Enabled): 10.2 ms
  • 4K resolution and 60 Hz refresh rate + 10 bit HDR (Game Mode Enabled): 10.0 ms
  • 4K resolution and 60 Hz at 4:4:4: 10.0 ms
  • 1080p resolution and 60 Hz refresh rate (Game Mode Disabled): 76.3 ms
  • 4K resolution and 60 Hz refresh rate (Game Mode Disabled): 59.7 ms
  • 4K resolution and 60 Hz refresh rate With Interpolation: 26.3 ms

Is the Q60A good for PS5, Xbox Series X and Xbox Series S?

We don’t recommend getting a Q60A for the PlayStation 5, Xbox Series X or Xbox Series S if you want to take advantage of the new consoles.

The television set does not come with any HDMI 2.1 ports. It also does not support 120 frames per second, 1440p, Dolby Vision or Variable Refresh Rate.

Due to the lack of local dimming zones and the lack of acceptable HDR brightness levels, the TV is also subpar for HDR gaming.

Is the Q60A good for Switch, PS4, PS4 Pro, Xbox One, Xbox One S and Xbox One X?

The Q60A does come with great input lag reduction when you are using its game mode. So, it is a pretty good television set for older HDMI consoles like the PS3, PS4, Wii U, Switch and Xbox One.

As we stated above, the Q60A is below average at displaying HDR content. So, we don’t recommend using it on HDR-enabled games on the PS4, PS4 Pro, Xbox One S and Xbox One X.

Is the Odyssey G3 suitable for PS5, Xbox Series X and other consoles?

The Odyssey G3 is a new budget gaming monitor from Samsung. So, is this display any good when it comes to playing games on the Sony’s PlayStation 5, Microsoft’s Xbox Series S, Microsoft’s Series X as well as other game consoles?

You can find out in this guide at Seeking Tech.

Quick Summary

The Samsung Odyssey G3 is a good budget monitor for those who want to play PlayStation 5, Xbox Series S and Xbox Series X games at up to 120 frames per second in 1080p, especially if you want Variable Refresh Rate and low input lag.

You can also play games from older consoles at 60 frames per second in 1080p.

Otherwise, the G3 is a poor choice for console gaming monitor due to the lack of support for HDMI 2.1, HDR, 1440p and 4K.

Does the Samsung Odyssey G3 comes with any HDMI 2.1 ports?

The Samsung Odyssey G3 does not come with any HDMI 2.1 ports.

Instead, this gaming monitor has a single HDMI 2.0 port.

The PS5, Xbox Series S and Xbox Series X use HDMI 2.1 to play games at 120 frames per second in up to 4K. With HDMI 2.0, the PS5 can play games at 120 frames per second in up to 1080p while the Xbox Series consoles can play games at 120 frames per second in up to 1440p.

For older consoles (like the PS4, Xbox One and Switch), you should be able to play games at 60 frames per second in a maximum resolution of 1080p with the G3.

Maximum Resolution

The maximum resolution for the Odyssey G3 is 1080p, which is 1920 x 1080.

Although the new PS5 and Xbox Series X consoles are built for 4K although both can output at up to 8K. Both of these systems can also display at 1080p.

The Xbox Series S is designed mainly as a 1080p or 1440p console although it is capable of displaying at up to 8K as well.

Native Refresh Rate

The Odyssey G3 features a native refresh rate of 144 Hz, which means that it can display games at up to 144 frames per second. With that said, only certain PC games can run at 144 FPS.

For the new consoles, this monitor will support frame rates of up to 120 frames per second on the PlayStation 5, Xbox Series X and Xbox Series S.

For older HDMI consoles, you can play games at up to 60 frames per second with this screen.

Adaptive Sync Support

When it comes to adaptive sync, the Samsung Odyssey G3 supports FreeSync and Variable Refresh Rate. The monitor is also compatible with GSYNC.

All three of these display features are designed to remove any noticeable stutter and tearing from games that don’t have a stable frame rate.

Variable Refresh Rate is currently being used by the Xbox Series S and Xbox Series X consoles. VRR is also expected to come to the PlayStation 5 in the future.

Samsung Odyssey G3’s Input Lag

The input lag is minuscule on the G3. For a lag-free gaming experience, we recommend getting a display that has latency that is less than 30 ms.

Based on the tests done by RTINGS, the G3’s input lag falls way below the aforementioned upper limit.

You can find the latency test results below (via RTINGS):

  • 1080p: 5.0 ms
  • 1080p and 60 frames per second: 10.0 ms
  • Variable Refresh Rate: 5.4 ms
  • Variable Refresh Rate and 60 frames per second: 10.8 ms
  • Black Frame Insertion (BFI): 7.6 ms

Samsung Odyssey G3 HDR Features

The Odyssey G3 does not support any HDR features. As a result, you will only play games in SDR mode on consoles.

Is the Samsung Odyssey G3 good for PS5, Xbox Series S and Xbox Series X?

The Odyssey G3 is not the best monitor for the PlayStation 5, Xbox Series S and Xbox Series X if you want to get the most out of these consoles as this screen does not support HDMI 2.1, 1440p, 4K or HDR.

With that said, it is capable of displaying PS5, Xbox Series S and Xbox Series X games at up to 120 frames per second in 1080p. Not to mention that it has extremely low input lag and comes with Variable Refresh Rate support.

Is the Samsung Odyssey G3 good for Switch, PS4, and Xbox One?

The Odyssey G3 is a good monitor for older consoles due to the aforementioned low input lag.

Due to the lack of HDR and the maximum resolution being only 1080p, this display may not be ideal for the PS4 Pro or Xbox One X.

2021 LG NanoCell 75, 80 and 90 wall mount specs

In 2021, LG released new versions of the LG NanoCell 75, 80 and 90 televisions. If you want to mount any of these new NANO TVs on a wall, then you can follow this guide at Seeking Tech to find the most suitable options.

Mounting Specs

You can find the mounting specifications for the currently available screen sizes of the 2021 NANO 75, NANO 80 and NANO 90 below:

LG NanoCell 75 Series 2021 43 inch 4K Smart UHD TV (43NANO75UPA)

  • Dimensions without Stand: 38.1″ x 22.2″ x 2.3″
  • Weight without Stand: 20.3 lbs.
  • Mount VESA: 200 mm x 200 mm

LG NanoCell 75 Series 2021 50 inch 4K Smart UHD TV (50NANO75UPA)

  • Dimensions without Stand: 44.1″ x 25.6″ x 2.3″
  • Weight without Stand: 26.9 lbs.
  • Mount VESA: 200 mm x 200 mm

LG NanoCell 75 Series 2021 55 inch 4K Smart UHD TV (55NANO75UPA)

  • Dimensions without Stand: 48.6″ x 28.1″ x 2.3″
  • Weight without Stand: 32.6 lbs.
  • Mount VESA: 300 mm x 300 mm

LG NanoCell 75 Series 2021 65 inch 4K Smart UHD TV (65NANO75UPA)

  • Dimensions without Stand: 57.2″ x 33.0″ x 2.3″
  • Weight without Stand: 49.8 lbs.
  • Mount VESA: 300 mm x 300 mm

LG NanoCell 75 Series 2021 75 inch 4K Smart UHD TV (75NANO75UPA)

  • Dimensions without Stand: 66.1″ x 38.0″ x 2.4″
  • Weight without Stand: 69.2 lbs.
  • Mount VESA: 400 mm x 400 mm

LG NanoCell 80 Series 2021 50 inch 4K Smart UHD TV (50NANO80UPA)

  • Dimensions without Stand: 44.1″ x 25.7″ x 1.9″
  • Weight without Stand: 30.9 lbs.
  • Mount VESA: 200 mm x 200 mm

LG NanoCell 80 Series 2021 55 inch 4K Smart UHD TV (55NANO80UPA)

  • Dimensions without Stand: 48.5″ x 28.2″ x 1.7″
  • Weight without Stand: 35.9 lbs.
  • Mount VESA: 300 mm x 300 mm

LG NanoCell 80 Series 2021 65 inch 4K Smart UHD TV (65NANO80UPA)

  • Dimensions without Stand: 57.2″ x 33.0″ x 1.7″
  • Weight without Stand: 54.0 lbs.
  • Mount VESA: 300 mm x 300 mm

LG NanoCell 80 Series 2021 75 inch 4K Smart UHD TV (75NANO80UPA)

  • Dimensions without Stand: 65.9″ x 38.0″ x 1.8″
  • Weight without Stand: 79.1 lbs.
  • Mount VESA: 400 mm x 400 mm

LG NanoCell 90 Series 2021 55 inch 4K Smart UHD TV (55NANO90UPA)

  • Dimensions without Stand: 48.5″ x 28.2″ x 1.8″
  • Weight without Stand: 39.7 lbs.
  • Mount VESA: 300 mm x 300 mm

LG NanoCell 90 Series 2021 65 inch 4K Smart UHD TV (65NANO90UPA)

  • Dimensions without Stand: 57.2″ x 33″ x 1.8″
  • Weight without Stand: 62.2 lbs.
  • Mount VESA: 400 mm x 400 mm

LG NanoCell 90 Series 2021 75 inch 4K Smart UHD TV (75NANO90UPA)

  • Dimensions without Stand: 65.9″ x 37.9″ x 1.8″
  • Weight without Stand: 83.8 lbs.
  • Mount VESA: 400 mm x 400 mm

LG NanoCell 90 Series 2021 86 inch 4K Smart UHD TV (86NANO90UPA)

  • Dimensions without Stand: 75.8″ x 43.5″ x 1.8″
  • Weight without Stand: 120.2 lbs.
  • Mount VESA: 600 mm x 400 mm

For the uninformed, the Mount VESA refers to the horizontal and vertical distances of the mounting screw holes located on the back of your 2021 NANO television set.

VESA Mounting Pattern (example from different TV).

Compatible fixed mount

If you want a mount to simply keep your NANO 75, 80 or 90 TV in place, then we recommend checking out the PIXT1 Ultra Slim Low Profile Fixed TV Wall Mount Bracket from Pipishell.

When paired with this mount, your 2021 LG NANO, will be just 1.37” away from the wall. This will save you a little bit of space in addition to providing a nice minimalist look.

The PIXT1 has a VESA mounting range of 200 mm x 200 mm to 800 mm x 600 mm in addition to being able to hold a maximum of 132 pounds. So, it should be compatible with all screen sizes from the 2021 NanoCell 75, NanoCell 80 and NanoCell 90 series.

You can install the Pipishell mount on brick walls, concrete walls in addition to studs that are spaced 16”, 18” or 24” apart. The product also comes with a bubble level as well as several cable ties.

You can purchase our recommend fixed mount for your NANO, if you are interested, on Amazon with the following link:

Compatible tilt mount

Being able to tilt your 2021 NanoCell is a great feature if you want to get better viewing angles in addition to prevent screen glares from appearing. If you are interested in this feature, then you should take a look at the WLT103M-ES Adjustable Tilt TV Wall Mount Bracket from Everstone.

With this mount, your NANO 75, 80 or 90 will sit at 2.8” away from the wall, giving you enough distance to tilt the television set at a maximum of 15 degrees downwards. You will also be able to tilt the screen a maximum of 5 degrees upwards.

The WLT103M-ES has a VESA mounting range of 100 mm x 100 mm to 600 mm x 400mm. As it can also hold up to 165 pounds, this mount should support all the screen sizes of the 2021 NanoCell 75, NanoCell 80 and NanoCell 90.

The Everstone tilting mount can be installed on concrete in addition on studs with spacing of 16”, 18” or 24”. The product comes with a bubble level tool in addition to a bonus HDMI cable. After installation, you can also level your TV if it looks off-balance.

You can purchase our recommended tilt mount for your 2021 NANO, if you are interested, with the following Amazon link:

Compatible full motion mount

If you want to watch your NanoCell 75, 80 and 90 from many different positions, then we suggest getting a mount with swiveling capabilities so that you can get great viewing angles no matter where you sit. If you are interested in one, then you should check out the MD2298-XL Full Motion TV Wall Mount Bracket from Mounting Dream.

With this mount, your 2021 NANO TV will be 2.75” away from the wall when fully retracted. You will be able to extend it all the way out to 18.5″ away from the wall.

The extension will let you swivel your NanoCell 75, 80 or 90 at up to 45 degrees to the left or up to 45 degrees to the right. You can also tilt your 4K television at a maximum of 15 degrees downwards as well as a maximum of 5 degrees upwards.

The MD2298-XL fits the VESA mounting range from 200 mm x 100 mm to 800 mm x 400 mm. With a weight capacity limit of 132 pounds as well, this mount should be compatible with all screen sizes of the 2021 NanoCell 75, 80 and 90.

The Mounting Dream product can be installed on concrete, studs that are 16” apart, studs that are 18” apart and studs that are 24” apart. You can also level your TV post-installation with the included bubble level. Furthermore, the product comes with a drilling bit and cable ties.

If you are interested, you can purchase our recommended full motion mount with the following Amazon link:

Hisense U6G, U7G, U8G and U9DG wall mount specs

Hisense has several new television models released in 2021 with the U6G, U7G, U8G and U9DG. You can follow this guide to see what are the most suitable options when it comes to mounting these new TVs on a wall in your home.

Mounting Specs

You can take a look at the mounting specifications for the currently available screen sizes of the U6G, U7G, U8G and U9DG below:

50” Hisense U6G 4K ULED Hisense Android Smart TV (50U6G)

  • Dimensions without Stand: 43.8” x 25.4” x 3.1”
  • Weight without Stand: 27.8 lbs.
  • Mount VESA: 300 mm x 200 mm
  • Mount Screw Type: M6

55” Hisense U6G 4K ULED Hisense Android Smart TV (55U6G)

  • Dimensions without Stand: 48.3” x 28.0” x 3.1″
  • Weight without Stand: 32.4 lbs.
  • Mount VESA: 300 mm x 200 mm
  • Mount Screw Type: M6

65” Hisense U6G 4K ULED Hisense Android Smart TV (65U6G)

  • Dimensions without Stand: 57.0” x 32.9” x 3.1″
  • Weight without Stand: 65.0 lbs.
  • Mount VESA: 300 mm x 200 mm
  • Mount Screw Type: M6

75” Hisense U6G 4K ULED Hisense Android Smart TV (75U6G)

  • Dimensions without Stand: 66.0” x 37.8” x 3.3″
  • Weight without Stand: 63.5 lbs.
  • Mount VESA: 600 mm x 300 mm
  • Mount Screw Type: M6

55” Hisense U7G 4K ULED Hisense Android Smart TV (55U7G)

  • Dimensions without Stand: 48.3” x 28.2” x 3.5″
  • Weight without Stand: 32.4 lbs.
  • Mount VESA: 300 mm x 200 mm
  • Mount Screw Type: M6

65” Hisense U7G 4K ULED Hisense Android Smart TV (65U7G)

  • Dimensions without Stand: 57.0” x 33.1” x 3.5″
  • Weight without Stand: 66.0 lbs.
  • Mount VESA: 300 mm x 200 mm
  • Mount Screw Type: M6

75” Hisense U7G 4K ULED Hisense Android Smart TV (75U7G)

  • Dimensions without Stand: 66.0” x 38” x 3.3″
  • Weight without Stand: 76.3 lbs.
  • Mount VESA: 600 mm x 300 mm
  • Mount Screw Type: M6

55” Hisense U8G 4K ULED Hisense Android Smart TV (55U8G)

  • Dimensions without Stand: 48.5” x 28.2” x 3.9″
  • Weight without Stand: 38.1 lbs.
  • Mount VESA: 400 mm x 300 mm
  • Mount Screw Type: M6

65” Hisense U8G 4K ULED Hisense Android Smart TV (65U8G)

  • Dimensions without Stand: 57.1” x 33.1” x 4.1″
  • Weight without Stand: 53.4 lbs.
  • Mount VESA: 400 mm x 400 mm
  • Mount Screw Type: M6

75” Hisense U9DG 4K ULED Hisense Android Smart TV (75U9DG)

  • Dimensions without Stand: 66.0” x 39.0” x 3.4″
  • Weight without Stand: 90.6 lbs.
  • Mount VESA: 600 mm x 400 mm
  • Mount Screw Type: M8

For the uninformed, the Mount VESA is a measurement featuring the horizontal and vertical distances of the four mounting screw holes located on the back of the Hisense U6G, U7G, U8G and U9DG.

VESA Mounting Pattern (example from different TV).

Compatible fixed mount

If you are looking for a mount to simply keep your U6G, U7G, U8G or U9DG in a fixed position, then we recommend getting the MI-305B Low-Profile TV Wall Mount from Mount-It.

With this mounting bracket, your Hisense television will be sitting at just 1” away from the wall. As a result, your TV will barely stick out. A slide-in security bar is also included to prevent your television from being stolen (you do need a padlock, which is not included, however).

The MI-305B has a VESA mount range of 100 mm x 100 mm to 750 mm x 450 mm. It should be able to hold weights of up to 175 pounds. Therefore, it should be compatible with all the screen sizes of the U6G, U7G, U8G and U9DG.

This Mount-It product can be installed on a brick wall, concrete wall in addition to wall with studs that are 8″, 16” or 24” apart. You can also adjust the height of your 2021 Hisense TV after installing the mount of the wall.

If you are interested, you can purchase our recommend fixed mount for the U6G, U7G, U8G and U9DG on Amazon with the following link:

Compatible tilt mount

Tilting you U6G, U7G, U8G or U9DG will help eliminate screen glares and give you better viewing angles. If you are interested in getting this feature, then we recommend taking a look at the EGLT3 Tilting TV Wall Mount from ECHOGEAR.

When used with this mount, your 2021 Hisense television set will be sitting at 2.3” away from the wall. This will give you space to tilt your screen at a maximum of 10 degrees.

The EGLT3 has a weight capacity limit of 135 pounds in addition to supporting a VESA mounting range of 200 mm x 100 mm to 600 mm x 400 mm. Therefore, this product should work with every screen size from the U6G, U7G, U8G and U9DG series.

The EGLT3 can be put on concrete walls, walls with studs that are spaced 16” apart and walls with studs that are spaced 24” apart. If your Hisense TV ends up looking off balanced, you can re-level it post-installation.

You can purchase our recommend tilt mount for the U6G, U7G, U8G and U9DG, if you are interested, on Amazon via the following link:

Compatible full motion mount

If you want to watch your U6G, U7G, U8G or U9DG from many different viewing arrangements, then you should consider getting a swiveling mount. If you are interested, then we recommend checking out the VLF728-B2 Premium Full Motion TV Wall Mount from Sanus.

With this product, you will be able to extend your 2021 Hisense television set from 2.15” to 28” away from the wall. The long extension will let you swivel your screen up to 57 degrees to the left or up to 57 degrees to the right.

With this Sanus Systems mount, you can also tilt your display at a maximum of 15 degrees downwards as well as a maximum of 5 degrees upwards. Furthermore, you can even roll your TV at up to 5 degrees.

The VLF728-B2 supports up to 125 pounds in addition to a VESA Mount range of 200 mm x 200 mm to 600 mm x 400 mm. So, it should be compatible with all screen size options of the U6G, U7G, U8G and U9DG.

The Sanus VLF728-B2 can be installed on a concrete wall or a wall with wood studs that are at least 16” apart.

If you are interested, you can purchase our recommend swiveling mount on Amazon with the following link:

Sony X85J wall mount specs

The X85J is one of several new television models released by Sony in 2021. If you want to mount this television set on a wall, then you should check out this guide at Seeking Tech to find the most suitable options.

Mounting Specs

You can find the mounting specifications for the X85J below (for the uninformed, VESA Distance refers to the horizontal and vertical distances between the mounting screw holes on the back of the TV):

43″ Sony X85J 4K TV (KD-43X85J)

  • Dimensions without Stand: 44.06 inches x 25.55 inches x 2.76 inches (or 1,119 mm x 649 mm x 70 mm)
  • Weight without Stand: 22.5 lbs. (or 10.2 kg)
  • VESA Distance: 200 mm x 200 mm

50″ Sony X85J 4K TV (KD-50X85J)

  • Dimensions without Stand: 44.06 inches x 25.55 inches x 2.76 inches (or 1,119 mm x 649 mm x 70 mm)
  • Weight without Stand: 28 lbs. (or 12.7 kg)
  • VESA Distance: 300 mm x 300 mm

55″ Sony X85J 4K TV (KD-55X85J)

  • Dimensions without Stand: 48.54 inches x 27.99 inches x 2.84 inches (or 1,233 mm x 711 mm x 72 mm)
  • Weight without Stand: 37.1 lbs. (or 16.8 kg)
  • VESA Distance: 300 mm x 300 mm

65″ Sony X85J 4K TV (KD-65X85J)

  • Dimensions without Stand: 57.17 inches x 32.83 inches x 2.84 inches (or 1,452 mm x 834 mm x 72 mm)
  • Weight without Stand: 48.7 lbs. (or 22.1 kg)
  • VESA Distance: 300 mm x 300 mm

75″ Sony X85J 4K TV (KD-75X85J)

  • Dimensions without Stand: 66 inches x 37.88 inches x 2.88 inches (or 1,675 mm x 962 mm x 73 mm)
  • Weight without Stand: 71.9 lbs. (or 32.6 kg)
  • VESA Distance: 300 mm x 300 mm

85″ Sony X85J 4K TV (KD-85X85J)

  • Dimensions without Stand: 74.88 inches x 42.88 inches x 2.88 inches (or 1,899 mm x 1,089 mm x 71 mm)
  • Weight without Stand: 98.1 lbs. (or 44.5 kg)
  • VESA Distance: 400 mm x 400 mm
VESA Mounting Pattern (example from different TV).

Official X85J wall mount

Sony does have an official wall mount that is compatible with the 55”, 65” and 65” versions of the X85J.

The Sony SU-WL855 Ultra Slim Wall-Mount Bracket comes with a magnetic lock system and lateral shift bracket to make the installation process easy and safe.

By using this official product, your X85J can be swiveled horizontally.

If you are interested, you can purchase the mount on Amazon with the following link:

Compatible fixed mount

If you just want a simple wall mount for your X85J, then we recommend taking a look at VIVO’s MOUNT-VW090F Ultra Heavy-Duty TV Wall Mount.

With this product, your 2021 Sony will be just 1.1” away from the wall, providing a nice, slim profile look.

The MOUNT-VW090F fits the 200 mm x 200 mm, 300 mm x 300 mm and 400 mm x 400 mm VESA distances. As it can also hold up to 154 pounds, this mount should be compatible with all the screen sizes of the Sony X85J.

For installation, the MOUNT-VW090F can be installed on a concrete surface or on a wall with studs. The product comes with a built-in bubble leveler in addition to featuring an anti-theft hole (although a lock is required to use it) and click-in spring locks with simple release cords.

If you are interested, you can purchase our recommended fixed wall mount on Amazon with the following link:

Compatible tilt mount

A tilting mount will help you get better viewing angles and avoid screen glares if you want to put your X85J high up on a wall.

If you are interested in getting one, then we suggest checking out Mounting Dream’s MD2104 Tilting TV Wall Mount Bracket.

With this product, you can extend your X85J TV from 2.6” to 7” away from the wall. The extension will give you room to tilt your 4K television screen at a maximum of 15 degrees downwards. You can also tilt your display at a maximum of 2 degrees upwards.

The MD2104 supports the 200 mm x 200 mm, 300 mm x 300 mm and 400 mm x 400 mm VESA distances in addition to being able to hold up to 100 pounds. So, it should support all the X85J sizes.

When it comes to installation, the MD2104 can be put on a concrete wall, wall with 16” stud spacings, wall with 18” stud spacings and wall with 24” stud spacings. A bubble level tool, along with drilling template and other installation hardware, also comes with the product.

You can buy our recommended tiltable mount, if you are interested, on Amazon via the following link:

Compatible full motion mount

A full motion mount is capable of both tilting and swiveling. Being able to swivel your television set horizontally will give you better viewing angles if you want to watch TV from different positions.

If you are interested in this type of product, then we suggest taking a look at Pipishell’s PILF2 Full Motion TV Wall Mount Bracket.

With this attached to your X85J, you will be able to swivel your television at up to 180 degrees horizontally, which is a maximum of 90 degrees to the left or right side thanks to the 29” extension.

You can also tilt the screen up to 10 degrees upwards and downwards.

The PILF2 can hold up to 132 pounds and supports all the VESA distances of the X85J television series.

For installation, you can put this Pipishell product on concrete or on studs with spacing that are 16” to 24” apart. Along with the mount, you will also get a bubble level tool in addition to several cable ties.

If you are interested, you can purchase our recommended full motion mounting bracket on Amazon with the following link:

LG A1 wall mount specs

The A1 is a new OLED model released by LG in 2021. You can follow this guide at Seeking Tech to find what the most suitable options are for mounting LG A1 on a wall.

Mounting Specifications

You can take a look at the dimensions (without stand), weight (without stand) and VESA space (which is the horizontal and vertical distances of the four mounting screw holes you find at the back of your TV) for the A1 below:

LG A1 55-inch Class 4K Smart OLED TV:

  • Dimensions without Stand: 48.3″ x 27.8″ x 1.8″
  • Weight without Stand: 40.6 Ibs.
  • VESA Space: 300 mm x 200 mm

LG A1 65-inch Class 4K Smart OLED TV:

  • Dimensions without Stand: 57.0″ x 32.7″ x 1.8″
  • Weight without Stand: 52.2 lbs
  • VESA Space: 300 mm x 200 mm
VESA Mounting Pattern (example from different TV).

Compatible fixed wall mount

If you are looking for a simple wall mount for your A1 without any extra frills, then we recommend checking out the MD2163-K Fixed TV Mount from Mounting Dream.

When paired with the 2021 LG OLED, the mount will give you a low profile look as the screen will be sitting at just 1.2” away from the wall.

The MD2163-K has a VESA mounting range of 200 mm x 100 mm to 600 mm x 400 mm, which includes the 300 mm x 200 mm pattern. Its heavy-duty steel frame can also hold up to 132 pounds. Therefore, it should be compatible with the 55-inch and 65-inch versions of the LG A1 4K Smart OLED TV.

You can install the MD2163-K, which comes with a bubble level tool, on concrete in addition to studs with distances that are 16”, 18” or 24” apart.

If you are interested, you can purchase our recommended fixed mount on Amazon with the following link:

Compatible tilting wall mount

You may also want to consider getting a mount with a tilting feature as it provides better viewing and prevents screen glares if you decide to put your LG A1 on the higher side of a wall.

If you are interested in getting one, then we recommend taking a look at the PILTK4 Tilt TV Wall Mount Bracket from Pipishell. With this product, your OLED television will be sitting at 1.5” away from the wall.

By using its dual hooks with anti-drop design, you will be able to tilt the television set a maximum of 7 degrees downwards.

The PILTK4 supports the 300 mm x 200 mm VESA pattern as it has a range of 100 mm x 100 mm to 600 mm x 400 mm. As it can also hold up to 132 pounds, this mount should support both screen sizes of the A1 4K Smart OLED.

When it comes to installation, you can put the Pipishell on brick, concrete, studs that are 16” apart or studs that are 24” apart. The product includes a bubble level and three cable ties.

You can purchase our recommended tilting mount, if you are interested, on Amazon via the following link:

Compatible full motion wall mount

If you would like to watch your A1 from multiple angles, then you should consider getting a mount that is capable of swiveling. If you are interested in one, then we recommend checking out the EGLF3 Swivel Articulating TV Wall Mount Bracket from ECHOGEAR.

With this product, your LG TV will sit at 2.9” away from the wall. You can then extend it for up to 19 inches.

The extension gives you the ability to swivel the A1 at up to 140 degrees, which is 70 degrees to the left or 70 degrees to the right. You can also tilt your screen at a maximum of 15 degrees.

The EGLF3 has a VESA range of 200 mm x 100 mm to 600 mm x 400 mm, which includes the 300 mm x 200 mm pattern. With a weight capacity limit of 110 pounds, the mount should support both the 55” and 65” screen sizes of the LG A1.

When it comes to installation, you can put the ECHOGEAR EGLF3 on a concrete wall, studs that are 16” apart or studs that are 17” apart. After installation, you can re-level at up to 3 degrees and re-center at up to 5.4 inches.

If you are interested, you can purchase our recommended swiveling mount on Amazon with the following link: