Speaker Archives - Page 2 of 3

JBL Go 3: How to pair, check battery and factory reset

The JBL Go 3 is a new miniature portable speaker. You can check out this step-by-step guide from Seeking Tech to see how you can pair, check the battery status and factory reset this product.

How to pair the JBL Go 3 to another Bluetooth device

To connect your JBL Go 3 to another device through Bluetooth (such as a computer, smartphone or tablet), you need to take the following steps:

1. First off make sure that the Go 3 and the other devices have been turned on.

2. On the other device, you should also make sure that you have Bluetooth enabled. You should also navigate to the Bluetooth menu where you can see what devices are in range.

3. Press the Bluetooth button on the JBL Go 3.

4. The JBL Go 3 should then show up in the Bluetooth menu of the other device. Make sure that the speaker is connected to the other device to complete the pairing.

How to fix JBL Go 3 Bluetooth connection issues

If you are experiencing issues with Bluetooth pairing or maintaining a Bluetooth connection with your JBL Go 3, you can try the following fixes:

1. Try to move the Go 3 speaker closer to the connected device. There should also be no obstructions, such as a wall, blocking the line of sight between the two. Furthermore, you should make sure that there isn’t any wireless interference such as microwave, Wi-Fi and other Bluetooth devices being nearby.

2. Turn off both your JBL Go 3 speaker and connected device and then turn them back on again. You can also try forgetting the Bluetooth pairing and then re-pair the speaker with the other device again.

3. If you are connecting the speaker with a computer, you should try updating the Bluetooth drivers. When it comes to computer support, the Go 3 supports the A2DP and AVRCP Bluetooth protocols.

How to check battery status the JBL Go 3

Unfortunately, there is no way to tell the exact percentage of battery life for your JBL Go 3. With that said, the LED indicator in between the power and Bluetooth buttons will start to blink red when the speaker is getting low on battery.

At that point, you should recharge by using the included USB cable. The LED indicator should then display a solid red light when the battery is recharging.

The JBL Go 3 has a battery life of up to 5 hours when its battery is fully charge. That amount could change depending on the volume level, media type being played as well as other factors.

How to factory reset the JBL Go 3

To restore the JBL Go 3 to its default factory settings, you need to take the following steps:

1. Turn the speaker on.

2. Press and hold the + button and the Bluetooth button on the speaker until the Go 3 turns itself off. This should take around three to five seconds.

Does the JBL Go 3 support Aux input, Connect+, Partyboost, Speakerphone or Voice Assistant?

The JBL Go 3 does not support Aux input as the only way you can connect it to another device is through Bluetooth.

The Go 3 also does not support JBL’s Connect+ or Partyboost as you won’t be able to pair it with another JBL speaker.

Last but not least, the JBL Go 3 does not have a built-in microphone. Therefore, it can’t be used as a speakerphone. It also does not support any type of voice assistance.

What’s the difference between the JBL PartyBox 100 and 110?

by Kevin Chen

The PartyBox 110 is a new portable speaker released by JBL in 2021. So, how does the new model compare to the older PartyBox 100?

You can find out in this comparison guide between these party speakers.

Quick Summary

When compared to the JBL PartyBox 100, the JBL PartyBox 110 supports a higher frequency response range in addition to having a much shorter recharge time. The PartyBox 110 is also the only one out of these products to support the JBL PartyBox App and offer protection against water splashes.

Overall, the newer JBL PartyBox 110 is an improvement over the JBL PartyBox 100.

Both speakers support bass boost, light show and True Wireless Audio. The two products also have the same output power, battery life and warranty length.

The PartyBox 100 is smaller in size and lighter in weight when compared to the PartyBox 110, however.

PartyBox 100 vs. PartyBox 110 Comparison Chart

You can take a look at Seeking Tech’s comparison table between the PartyBox 100 and PartyBox 110 below.

	JBL PartyBox 100 Portable Wireless Bluetooth Party Speaker	JBL PartyBox 110 Portable Wireless Bluetooth Party Speaker
What’s in the Box	1x JBL PartyBox Speaker 100 1x Quick Start Guide 1x Warranty Card 1x Safety Sheet 1x AC Power Cord	1x JBL PartyBox Speaker 110 1x Quick Start Guide 1x Warranty Card 1x Safety Sheet 1x AC Power Cord
Weight	9.70 kg	10.84 kg
Dimensions	551 mm x 290 mm x 288 mm	568 mm x 300 mm x 295 mm
Output Power	2x 5.25" Woofers 2x 2.25" Tweeter	2x 5.25" Woofers 2x 2.25" Tweeter
Frequency Response	45 Hz to 18 kHz	45 Hz to 20 kHz
Inputs	3.5mm Aux-in Mic/Guitar input with volume control USB port	3.5mm Aux-in Mic/Guitar input with volume control USB port
Outputs	Aux-out	Aux-out
Bass Boost?	Yes	Yes
True Wireless Stereo?	Yes	Yes
Light Show Mode?	Yes	Yes
PartyBox App?	No	Yes
Battery Life	Up to 12 hours	Up to 12 hours
Recharge Time	6.5 hours	3.5 hours
Waterproof Rating	None	IPX4
Warranty	1-year limited warranty	1-year limited warranty
Pricing	Check price on Amazon.(#CommissionsEarned)	Check price on Amazon.(#CommissionsEarned)

What’s in the Box

In addition to the main speaker unit, both products also include a quick starter guide, warranty card, safety sheet and AC power cord (the type of cord you will get depend on your region).

You can check out the breakdown of the content included inside each new retail box for both of these JBL products below:

JBL PartyBox 100:

1x JBL PartyBox Speaker 100
1x Quick Start Guide
1x Warranty Card
1x Safety Sheet
1x AC Power Cord

JBL PartyBox 110:

1x JBL PartyBox Speaker 110
1x Quick Start Guide
1x Warranty Card
1x Safety Sheet
1x AC Power Cord

Weight

When it comes to weight, the PartyBox 110 is a little bit heavier than the PartyBox 100.

You can check out the weight specifications below:

JBL PartyBox 100: 9.70 kg
JBL PartyBox 110: 10.84 kg

Dimensions

As for the physical size, the PartyBox is also bigger all around when compared to the PartyBox 100.

You can check out the measurements below:

JBL PartyBox 100: 551 mm x 290 mm x 288 mm
JBL PartyBox 110: 568 mm x 300 mm x 295 mm

Output Power

The two party speakers in this comparison have the same output power at 160 Watts.

Drivers

The JBL PartyBox 100 and JBL PartyBox 110 also have identical driver setup as both come with the following:

2x 5.25″ Woofers
2x 2.25″ Tweeter

Frequency Response

The newer PartyBox 110 can also reach a higher frequency than the older PartyBox 100.

You can find the frequency responses for both of these portable speakers below:

JBL PartyBox 100: 45 Hz to 18 kHz
JBL PartyBox 110: 45 Hz to 20 kHz

Inputs

In addition to supporting audio playback wirelessly over Bluetootth, the two PartyBoxes in this comparison support the following input methods:

3.5mm Aux-in
Mic/Guitar input with volume control
USB port

Outputs

When it comes to outputs, both JBL speakers come with an Aux-out.

Bass Boost

The PartyBox 100 and PartyBox 110 support Bass Boost, a mode you can use to increase the vibrations of the passive bass radiators.

True Wireless Stereo

Both of these products also support True Wireless Stereo, which will let you pair two speakers of the same kind (PartyBox 100 paired with PartyBox 100 and PartyBox 110 paired with PartyBox 110) over the Bluetooth connection.

This will allow you to set one speaker as the left channel and the other speaker as the right channel in a stereo setup.

Light Show Mode

The PartyBox 100 and PartyBox 110 also features a light show mode that will display lights from the speakers.

PartyBox App

The PartyBox 110 is the only one out of these products to support the PartyBox App. This phone application will allow you to easily set up True Wireless Stereo, customize the speaker settings, update the firmware and get support.

Battery Life

The two speakers have the same maximum battery life of up to 12 hours. The actual time depends on the volume, audio source and other factors.

Recharge Time

The battery recharge time is much shorter on the newer PartyBox 110 when compared to the PartyBox 100.

You can find the recharging lengths below:

JBL PartyBox 100: 6.5 hours
JBL PartyBox 110: 3.5 hours

Waterproof Rating

The PartyBox 110 is the only speaker in this versus guide to have a waterproof rating.

With a rating of IPX4, the JBL speaker should be protected against small water splashes from any direction.

Warranty

The JBL PartyBox 100 Portable Wireless Bluetooth Party Speaker and JBL PartyBox 110 Portable Wireless Bluetooth Party Speaker each comes with a 1-year limited warranty.

Resources:

What’s the difference between the Acton II Voice, Stanmore II and Uxbridge Voice?

by Kevin Chen

Marshall has three smart speakers currently available. So, what are the main differences between the Acton II Voice, Stanmore II Voice and Uxbridge Voice?

You can find out in this versus guide.

Quick Summary

When compared to the Acton II Voice and Uxbridge Voice, the Stanmore II Voice has the highest maximum sound pressure level in addition to the best power amplifier setup. The Stanmore II is also the only one out of this group to support RCA input.

The Acton II Voice is the second best when it comes to max SPL and power amp. It is also tied with the Stanmore II Voice at having the widest frequency ranges.

The Uxbridge Voice has the worst specs out of this group. Unlike the Acton II Voice and Stanmore II Voice, this speaker does not support 3.5 mm input. With that said, it is the only one to support Airplay 2 and WAP2. Not to mention that the Uxbridge is also the most affordable option.

Acton II Voice vs. Stanmore II vs. Uxbridge Voice Comparison Chart

You can find Seeking Tech’s comparison table between the three Marshall smart speakers below.

	Marshall Acton II Voice Smart Speaker	Marshall Stanmore II Voice Smart Speaker	Marshall Uxbridge Voice Smart Speaker
Voice Command	Amazon Alexa Google Assistant	Amazon Alexa Google Assistant	Amazon Alexa Google Assistant
Weight	4.53 lbs. (or 2.85 kg)	10.47 lbs. (or 4.75 kg)	3.06 lbs. (or 1.39 kg)
Dimensions	10.24 in x 6.30 in x 5.91 in (or 260 mm x 160 mm x 150 mm)	13.78 in x 7.68 in x 7.28 in (or 350 mm x 195 mm x 185 mm)	5.04 in x 6.61 in x 4.84 in (or 128 mm x 168 mm x 123 mm)
Color Variants	Black	Black	Black White
What’s in the Box	Acton II Voice with Amazon Alexa or Google Assistant Mains lead Quick start guide Legal and safety information	Stanmore II Voice with Amazon Alexa or Google Assistant Mains lead Quick start guide Legal and safety information	Uxbridge Voice with Amazon Alexa or Google Assistant Mains lead Quick start guide Legal and safety information
Required Apps	Amazon Alexa Versions: Amazon Alexa App and Marshall Voice App Google Assistant Versions: Google Assistant App and Google Home App	Amazon Alexa Versions: Amazon Alexa App and Marshall Voice App Google Assistant Versions: Google Assistant App and Google Home App	Amazon Alexa Versions: Amazon Alexa App and Marshall Voice App Google Assistant Versions: Google Assistant App and Google Home App
Wi-Fi Network Features	WPA 802.11b/g/n/ac 2.4 GHz/5 GHz	WPA 802.11b/g/n/ac 2.4 GHz/5 GHz	WPA/WAP2 802.11a/b/g/n/ac 2.4 GHz/5 GHz
Top Panel Controls	Source button Volume control knob Bass control knob Treble control knob Play/Pause button Mute/Unmute mic button	Source button Volume control knob Bass control knob Treble control knob Play/Pause button Mute/Unmute mic button	Volume button Bass button Treble button Play/Pause/Skip button Mute/Unmute mic and push to talk button Bluetooth pairing button
Microphone System	Dual mic array with acoustic noise cancellation	Dual mic array with acoustic noise cancellation	Dual mic array with acoustic noise cancellation
Wired Connectivity	3.5 mm	3.5 mm RCA	None
Wireless Connectivity	Amazon Alexa Version: Bluetooth and Spotify Connect Google Assistant Version: Bluetooth and Built-In Chromecast	Amazon Alexa Version: Bluetooth and Spotify Connect Google Assistant Version: Bluetooth and Built-In Chromecast	Amazon Alexa Version: Airplay 2, Bluetooth and Spotify Connect Google Assistant Version: Airplay 2, Bluetooth and Built-In Chromecast
Frequency Range	50 Hz to 20,000 Hz	50 Hz to 20,000 Hz	54 Hz to 20,000 Hz
Stereo or Mono?	Stereo	Stereo	Stereo
Maximum Sound Pressure Level	98 dB SPL @ 1 m	101 dB SPL @ 1 m	96 dB SPL @ 1 m
Cabinet Principle	Bass-reflex	Bass-reflex	Enclosed
Power Amplifiers	1x 30 Watt Class D amplifier for woofer 2x 15 Watt Class D amplifier for tweeters	1x 50 Watt Class D amplifier for woofer 2x 15 Watt Class D amplifiers for tweeters	1x 30 Watt Class D amplifier for woofer and tweeter
Mains Input Voltage	100 V to 240 V	100 V to 240 V	100 V to 240 V
Network Standby Power Consumption	Less than 2 W	Less than 2 W	Less than 2 W
Mains Frequency	50 Hz/60 Hz	50 Hz/60 Hz	50 Hz/60 Hz
Pricing	Check price on Amazon.(#CommissionsEarned)	Check price on Amazon.(#CommissionsEarned)	Check price on Amazon.(#CommissionsEarned)

Voice Command

The Acton II Voice, Stanmore II and Uxbridge Voice are available in two different versions as you can pick between one that supports Amazon Alexa or the other that supports Google Assistant.

Weight

The Stanmore II Voice is easily the heaviest out of this group, weighing more than twice as much as the second heaviest, the Acton II Voice. The Uxbridge Voice is the lightest.

You can check out the weight specifications for all three speakers below:

Acton II Voice: 4.53 lbs. (or 2.85 kg)
Stanmore II Voice: 10.47 lbs. (or 4.75 kg)
Uxbridge Voice: 3.06 lbs. (or 1.39 kg)

Dimensions

The Stanmore II Voice is also the biggest in terms of size. The Acton II Voice is slightly smaller while the Uxbridge Voice is the smallest overall.

You can take a look at the full measurements below:

Acton II Voice: 10.24 in x 6.30 in x 5.91 in (or 260 mm x 160 mm x 150 mm)
Stanmore II Voice: 13.78 in x 7.68 in x 7.28 in (or 350 mm x 195 mm x 185 mm)
Uxbridge Voice: 5.04 in x 6.61 in x 4.84 in (or 128 mm x 168 mm x 123 mm)

Color Variants

You can also check out the available color options for all three Marshall smart speakers below:

Acton II Voice:

Black

Stanmore II Voice:

Black

Uxbridge Voice:

Black
White

What’s in the Box

Along with the main speaker unit, each product also comes with a mains lead, quick starter guide as well as a legal and safety document.

You can find a breakdown of the included content in each packaging below:

Acton II Voice:

Acton II Voice with Amazon Alexa or Google Assistant
Mains lead
Quick start guide
Legal and safety information

Stanmore II Voice:

Stanmore II Voice with Amazon Alexa or Google Assistant
Mains lead
Quick start guide
Legal and safety information

Uxbridge Voice:

Uxbridge Voice with Amazon Alexa or Google Assistant
Mains lead
Quick start guide
Legal and safety information

Required Apps

The Acton II Voice, Stanmore II Voice and Uxbridge Voice all support the same smartphone apps.

For the Amazon Alexa versions, you will need the Amazon Alexa App and Marshall Voice App.

For the Google Assistant versions, you will need the Google Assistant App and Google Home App.

Wi-Fi Network Features

When it comes to Wi-Fi features, the Uxbridge Voice is the only one out of the three to support WPA 2. Otherwise, the smart speakers in this comparison have identical features.

You can find the full lists below:

Acton II Voice:

WPA
802.11b/g/n/ac
2.4 GHz/5 GHz

Stanmore II Voice:

WPA
802.11b/g/n/ac
2.4 GHz/5 GHz

Uxbridge Voice:

WPA/WAP2
802.11a/b/g/n/ac
2.4 GHz/5 GHz

Top Panel Controls

You can take a look at top panel controls for the three speakers below:

Acton II Voice:

Source button
Volume control knob
Bass control knob
Treble control knob
Play/Pause button
Mute/Unmute mic button

Stanmore II Voice:

Source button
Volume control knob
Bass control knob
Treble control knob
Play/Pause button
Mute/Unmute mic button

Uxbridge Voice:

Volume button
Bass button
Treble button
Play/Pause/Skip button
Mute/Unmute mic and push to talk button
Bluetooth pairing button

Microphone System

The three smart speakers use the same microphone system, which is a dual mic array with acoustic noise cancellation. This setup makes far field voice interaction between you and the speaker possible.

Wired Connectivity

Only the Acton II Voice and Stanmore II Voice support 3.5 mm input as the Uxbridge Voice is strictly a wireless speaker in terms of connectivity.

The Stanmore II Voice also features support for RCA input.

Wireless Connectivity

The Amazon Alexa versions of the Acton II Voice and Stanmore II Voice have the same wireless connection options. The Google Assistant versions for these two speakers also have the same wireless connectivity options.

With the newer Uxbridge Voice, Marshall added Airplay 2 support.

You can check out a breakdown of the wireless connectivity options below:

Acton II Voice:

Amazon Alexa Version: Bluetooth and Spotify Connect
Google Assistant Version: Bluetooth and Built-In Chromecast

Stanmore II Voice:

Amazon Alexa Version: Bluetooth and Spotify Connect
Google Assistant Version: Bluetooth and Built-In Chromecast

Uxbridge Voice:

Amazon Alexa Version: Airplay 2, Bluetooth and Spotify Connect
Google Assistant Version: Airplay 2, Bluetooth and Built-In Chromecast

Frequency Range

When it comes to the frequency range, the Acton II Voice and Stanmore II Voice both support lower ranges when compared to the Uxbridge Voice.

You can find the specs below:

Acton II Voice: 50 Hz to 20,000 Hz
Stanmore II Voice: 50 Hz to 20,000 Hz
Uxbridge Voice: 54 Hz to 20,000 Hz

Stereo or Mono?

All three speakers in this comparison guide are stereo speakers.

Maximum Sound Pressure Level

When it comes to the maximum sound pressure level, the Stanmore II Voice offers the highest dB, followed by the Acton II Voice. The Uxbridge Voice has the lowest dB.

You can check out the max SPL for all three below:

Acton II Voice: 98 dB SPL @ 1 m
Stanmore II Voice: 101 dB SPL @ 1 m
Uxbridge Voice: 96 dB SPL @ 1 m

Cabinet Principle

When it comes to cabinet principle, the Acton II Voice and Stanmore II Voice are both bass-reflex while the Uxbridge Voice is enclosed.

Power Amplifiers

For power amplifiers, the Stanmore II Voice is the best equipped, followed by the Acton II Voice and then the Uxbridge Voice.

You can find the amp setups for the three smart speakers below:

Acton II Voice:

1x 30 Watt Class D amplifier for woofer
2x 15 Watt Class D amplifier for tweeters

Stanmore II Voice:

1x 50 Watt Class D amplifier for woofer
2x 15 Watt Class D amplifiers for tweeters

Uxbridge Voice:

1x 30 Watt Class D amplifier for woofer and tweeter

Mains Input Voltage

The mains input voltages for the three speakers are identical at 100 V to 240 V.

Network Standby Power Consumption

The network standby power consumption for these Marshall speakers is also the same at less than 2 W.

Mains Frequency

Furthermore, all three also offer the same mains frequency at 50 Hz/60 Hz.

Resources:

How to fix sound issues with the SRS-XG500, SRS-XP500 and SRS-XP700

by Kevin Chen

When using the Sony SRS-XG500, SRS-XP500 and/or SRS-XP700 X-Series Portable Wireless Speakers, you may experience sound-related issues that may include the following:

Distorted sound
Humming
Low sound level
No sound
Noise
Sound from only one speaker when multiple speakers are connected

If you are experiencing any of the above issues, then you can follow this troubleshooting guide at Seeking Tech to find some potential fixes.

Check the Power and Bluetooth Indicators

The first step we recommend taking is to check the power and Bluetooth indicators on your speaker.

The power indicator on your speaker should be green when it is turned on.

If the Bluetooth indicator is blinking twice, then that means that it hasn’t been paired to another device yet. If the Bluetooth indicator is blinking once, then that means that it is searching for the device that it was previously paired with.

If the Bluetooth indicator stays lit, then it means that it is currently paired with another device.

If you are having pairing issues, then you can check out this tutorial.

Check the Connections

If your power and Bluetooth indicators are normal, then the next step we suggest taking is to check what is connected to your speaker.

If you are using Bluetooth and have something plugged into the stereo mini jack, USB Type-A port and/or the mic/guitar input, then we recommend disconnecting all of the plugs to see if doing so will resolve any of the aforementioned audio problems.

If you are using the stereo mini jack, then you should make sure that the audio cable is properly connected.

If you are using a computer, smartphone and/or other device with an operating system, try to change the audio output settings (such as disabling the equalizer function).

If your speaker is paired with the other device using the Bluetooth connection, the other device may support “Priority on sound connection (SBC).” So, if possible, make sure you are using the “Priority on sound connection (SBC)” setting.

You should also keep in mind that any device that have a built-in radio or turner cannot be connected over Bluetooth with the SRS-XG500, SRS-XP500 and SRS-XP700 due to the noise that may potentially occur.

Recharge the Internal Battery

If your speaker is running low on battery, then the sound level will be lowered as well. If you believe that this is leading to your audio issues, then you can try turning off your speaker and then recharging its internal battery.

Repositioning Your Speaker

The next step you can take to resolving the sound issues with your SRS-XG500, SRS-XP500 and/or SRS-XP700 is to reposition your speaker.

Move your speaker away from a television, radio and/or tuner as the noise may interfere with the sound output of your speaker.

If you are using the Bluetooth connection, you should also avoid using your Sony speaker anywhere close to a microwave oven as well as other Bluetooth and Wi-Fi devices as these may interfere with the wireless connection of the speaker.

Furthermore, you should also move the speaker as close as possible to the device it is connected to via Bluetooth. You should make sure that there aren’t any physical obstacles in-between as they may hinder the wireless connection.

Updating the Firmware

The one last solution you can try, if none of the aforementioned fixes worked in resolving your audio issues, is to update the firmware on your speaker.

To do so, you need to take the following steps:

1. Make sure you have an Android or iOS device that can be paired with the SRS-XG500, SRS-XP500 and SRS-XP700 speaker. This device also be able to be compatible with the Sony | Music Center App.

2. Download and install the Sony | Music Center App from either Apple Store or Google Play Store.

3. Connect your speaker to a power source as you can’t update its firmware if it is running on battery.

4. Turn on your speaker and make sure that it is paired with the device that has the Sony | Music Center App installed.

5. Open the Sony | Music Center App

6. If a new software version for your speaker is available, the app will send out a notification that will prompt you for an update.

7. Follow the on-screen instructions to complete the firmware update.

Hopefully, the new firmware will fix your audio issues.

How to fix pairing issues with SRS-XG500, SRS-XP500 and SRS-XP700

by Kevin Chen

The SRS-XG500, SRS-XP500 and SRS-XP700 are three new X-Series Portable Wireless Speakers from Sony. If you are having problems with trying to pair these speakers to another device using Bluetooth, then you can follow this guide at Seeking Tech to find some potential fixes.

Before we begin, you should know that this troubleshooting guide will cover the following speakers:

Sony XG500 X-Series Portable Wireless Speaker (SRS-XG500)
Sony XP500 X-Series Portable Wireless Speaker (SRS-XP500)
Sony XP700 X-Series Portable Wireless Speaker (SRS-XP700)

SRS-XG500, SRS-XP500 and SRS-XP700 Bluetooth Indicators

The first step we recommend taking is to turn on your Sony X-Series Portable Wireless Speaker and then look at the indicator next to the Bluetooth symbol on the speaker.

If you see that the light is flashing two times, this indicates that the speaker has not yet been paired to another Bluetooth device.

If you see that the indicator is flashing once slowly, then this indicates that the speaker is searching for the Bluetooth device that it was previously paired with.

If the indicator stays lit up, then this indicates that it is connected to a Bluetooth device.

How to pair the SRS-XG500, SRS-XP500 and SRS-XP700

If you have not yet initially set up Bluetooth pairing with the X-Series Portable Wireless Speaker and the device you want to connect it to, then you need to take the following steps:

1. First off, make sure that the other device is turned on and the Bluetooth for it is enabled.

If the other device uses an operating system, then the following are supported by the three speakers:

iOS 10.0 or later
macOS Catalina version 10.15
Windows 10
Windows 8.1

2. Turn on your speaker and then press the Bluetooth button to put it in pairing mode (the indicator next to it will flash two times). You should also hear a voice saying “Bluetooth Pairing” coming out of the speaker.

3. Go to the Bluetooth menu on the other device where you can add the speakers.

On Windows 10, you will find it by going to Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth.

On a Mac, you will find this menu by going to System Preferences > Bluetooth.

Note: If you are trying to pair your speaker with another device that don’t have an operating system or any sort of menu, try to press the Bluetooth button (or its equivalent) on the other device in order to start the pairing.

4. The model number for your speaker (SRS-XG500, SRS-XP500 or SRS-XP700) should show up on the Bluetooth menu on the other device. Select it to being the pairing procedure.

5. If the other device you are trying to pair your speaker with asked for a passkey, passcode, password, PIN code or PIN number, then you need to input 0000.

How to fix Bluetooth pairing issues with SRS-XG500, SRS-XP500 and SRS-XP700

If you are still having trouble trying to pair your X-Series Portable Wireless Speaker to another device, you can try doing the following:

1. Try moving the speaker and the other device closer together. Sony recommends that both should be within 1 meter (or 3.2 feet) when pairing.

2. You should also make sure that there is a direct line a sight between the speaker and the other device. Remove any objects that may be block the line of sight as these obstacles may weaken the Bluetooth communication signal.

3. You should also make sure that there are no other wireless devices within the same pairing range. Wi-Fi devices, other Bluetooth devices and even a microwave oven may weaken the Bluetooth signal between the speaker and the device you want to pair it with.

Resetting the SRS-XG500, SRS-XP500 and SRS-XP700

If repositioning and removing any potential interference did not resolve your pairing issues, you can try resetting both your speaker as well as the device you are trying to pair it with.

To reset the SRS-XG500, SRS-XP500 and SRS-XP700, you need to press and hold the power button for around 8 seconds.

How to factory reset the SRS-XG500, SRS-XP500 and SRS-XP700

If a normal reset does not work, you can try restoring your speaker to its factory default settings.

To do so, make sure your SRS-XG500, SRS-XP500 or SRS-XP700 is turned on.

Afterwards, press and hold both the Play/Pause and Mega Bass buttons at the same time for five seconds.

Your Sony speaker should then be restored to its factory default settings.

How to update the firmware for SRS-XG500, SRS-XP500 and SRS-XP700

You can also try updating the firmware for the speakers as the latest software version may fix your pairing issues.

To do so, you need to do the following:

1. Make sure that your speaker is turned on and plugged into a power outlet as you can’t run the update if you are using the internal battery for power.

2. Download and install the Sony | Music Center App from the Apple App Store or Google Play Store on a compatible device.

3. Make sure that the device with the Sony | Music Center App is paired with the speaker.

4. Open the Sony | Music Center App.

5. If there’s is an update available, you will get a notification. Follow the onscreen instructions to complete the firmware update.

JBL Clip 4: How to pair, factory reset, clean and more

by Kevin Chen

The Clip 4 is the latest miniature speaker from JBL.

You can follow this guide at Seeking Tech to see how you can pair it, factory reset its settings, clean it and more.

How to pair the JBL Clip 4

In order to pair the JBL Clip 4 to another device, you need to take the following steps:

1. First, make sure that the Clip 4 has battery life. Turn on the speaker and then look at the LED indicator at the top side of the mini speaker. If it is blinking, you need to recharge the speaker using the included USB cable.

2. Now that your speaker is powered on, you can then open the Bluetooth menu on the device you want to pair the Clip 4 with.

In this guide, we will be using a smartphone with the Android operating system as an example.

The Bluetooth menu on an Android device is located in Settings > Connected Devices > Bluetooth. In the Bluetooth menu, you need to select “Pair new device” or its equivalent.

3. Next, you need to press the Bluetooth button on your JBL Clip 4 when it is powered on. If done correctly, you should see the speaker appear in the aforementioned Bluetooth menu on your device.

4. Select the JBL Clip 4 option from the Bluetooth menu on the device you are trying to pair it with. This will pair the two together.

How to disconnect the JBL Clip 4 from a paired device

To disconnect the Clip 4 from a paired device, you need to do the following:

1. If you simply want to disconnect the Clip 4 but want to keep its pairing setting so that you can quickly connect it to the same device later on, you can press the power button on the speaker.

2. If you no longer want to connect to the same device, you need to go back to the aforementioned Bluetooth menu on the device.

On Android, the menu is located at in Settings > Connected Devices > Bluetooth.

3. Locate the JBL Clip 4 under “Paired devices,” or its equivalent heading.

4. You should be able to find a way to forget or delete the speaker from the device.

On Android, you can select the gear cog symbol located to the right of the wording. In the subsequent Device details menu, you will find the “Forget” option.

5. If you want to pair the Clip 4 to the same device again, you need to redo the pairing steps we mentioned earlier in this tutorial.

How to factory reset JBL Clip 4

In order to factory reset the JBL Clip 4, you need to do the following:

1. First off, you need to turn on your Clip 4 speaker if you haven’t done so already.

2. With the speaker turned on, press and hold the Volume+ and Play/Pause at the same time for at least 10 seconds.

3. The Clip 4 will be turned off and its settings will be completely reset to its original default settings.

4. If you want to pair this speaker to the same device as before, you will need to delete or forget the original Bluetooth connection before using the aforementioned pairing procedure.

How to clean JBL Clip 4

To clean the outside of the JBL Clip 4, we recommend using highly concentrated isopropyl alcohol with a cotton swab or microfiber cleaning cloth. This solution is great for electronic devices because it will clean oil, dirt and other containment. Not to mention that it will also evaporate quickly and won’t leave behind any residue, making it safe for electronics.

If you don’t have any isopropyl alcohol, then you can pick up the MG Chemicals – 824-1L 99.9% Isopropyl Alcohol Electronics Cleaner on Amazon with this link. (#CommissionsEarned).

When cleaning with isopropyl alcohol, make sure the speaker is not turned on until the solution is completely dry.

If your JBL Clip 4 have been in pool water or saltwater, you need rinse the speaker as the chemicals in the pool water and salt from the saltwater will cause damage to the waterproof seal and outer casing over time if not cleaned properly.

To clean the Clip 4 from pool and/or saltwater, you can simply rinse the speaker using regular tap water. The speaker can withstand being underwater at up to 1 meter deep for 30 minutes.

Make sure that the Clip 4 is turned off before rinsing. You should also make sure that the speaker is completely dried out before turning it back on again.

Can you pair the JBL Clip 4 with another speaker?

Unfortunately, you can’t pair the Clip 4 with another speaker as this product does not support JBL Connect +, JBL Partyboost or True Wireless Stereo.

Does JBL Clip 4 support voice assistance?

The JBL Clip 4 does not support Amazon Alexa, Google Assistant any other form of voice assistance.

Does the JBL Clip 4 come with any 3.5mm aux ports?

The Clip 4 does not come with any 3.5mm auxiliary ports for inputs or outputs. It can only communicate with other devices using a Bluetooth connection.

JBL Charge 5: How to pair, upgrade firmware, use as power bank and more

by Kevin Chen

The Charge 5 is the latest portable Bluetooth speaker from JBL. You can follow this guide from Seeking Tech to find out how to pair it, upgrade its firmware, recharge it and use it as a power bank.

How to pair the JBL Charge 5 with another device

To pair the Charge 5 with another device, you need to take the following steps:

1. First, make sure the device you are trying to pair with the speaker uses a Bluetooth wireless connection. In this tutorial we will be using an Android smartphone.

2. You need to also make sure that the Bluetooth connection has been turned on for the device.

3. On the device, you need to navigate to the menu where you can pair with a new electronic. You can do so on an Android phone by going to Settings > Connected devices > Bluetooth > Pair new device.

4. Now that you have the prerequisites in place, press the Bluetooth button on the JBL Charge 5. You should then see the speaker in the menu of the device you are trying to pair with.

5. Activate the speaker from the device’s menu to pair the speaker to the device.

How to pair the JBL Charge 5 with another speaker

To pair a Charge 5 with another speaker, you must do the following:

1. You first need to make sure that the speaker you are trying to pair with support the JBL PartyBoost feature. Currently, the following speakers are compatible:

JBL Boombox 2 Portable Bluetooth Speaker
JBL Charge 5 Portable Bluetooth Speaker
JBL Flip 5 Portable Bluetooth Speaker
JBL Flip 5 Portable Bluetooth Speaker Eco Edition
JBL Pulse 4 Portable Bluetooth Speaker
JBL Xtreme 3 Portable Waterproof Speaker

2. To pair your JBL Charge 5 to any of the aforementioned speakers, press the pair button on the Charge 5 first. If you are having a hard time finding the button, it looks like the infinity symbol (∞).

3. After pressing the pair button on the Charge 5, you need to quickly press the pair button on the other speaker you are trying to make a connection with.

How to upgrade the firmware for the JBL Charge 5

To upgrade the firmware for the JBL Charge 5, you need to do the following:

1. First, off you need a smartphone that has been paired with the speaker. If you haven’t paired the Charge 5 with your phone, you can follow the very first tutorial of this guide.

2. With the portable speaker paired to your phone, you need to download the JBL Portable App on the Google Play Store (if you are using an Android phone) or Apple App Store (if you are using an iPhone).

3. Open the JBL Portable App and your Charge 5 should appear.

4. You can upgrade to the latest firmware available in the settings menu of the Charge 5. You can find settings by selecting the gear cog symbol on the speaker’s page in the app. If there is a new software update available, you will see a red dot appear on top of the gear cog symbol.

How to recharge the JBL Charge 5

To recharge the JBL Charge 5, you need to do the following:

1. Use the USB Type-C to USB Type-A cable that comes with the Charge 5.

2. Plug the USB Type-C end of the cable (it is the smaller one) to the back of the USB-C port of the speaker.

3. Plug the USB Type-A end of the cable into a power source.

It is important to note that the Charge 5 does not support a power outlet right out of the box. So, you will need to use a USB-A power adapter.

How to use the JBL Charge 5 as a power bank

To use the JBL Charge 5 as a power bank to recharge other devices, you need to follow these instructions:

1. Make sure to use an USB Type-C to USB Type-A cable. You can use the one that comes with the Charge 5.

2. Open the compartment on the back of the speaker.

3. Plug the USB Type-A end of the cable into USB-A port of the newly opened compartment on the speaker.

4. Plug the USB Type-C end of the cable to the device you what to recharge.

Resource:

https://eu.jbl.com/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw66f41c7b/pdfs/JBL_Charge%205_QSG_SOP_V8_Online.pdf

How to set up TWS on JBL PartyBox 100, 200, 300, 310, 1000 and PartyBox On-The-Go

by Kevin Chen

The JBL PartyBox 100, 200, 300, 310, 1000 and PartyBox On-The-Go speakers support the True Wireless Stereo (or TWS) mode. You can follow this guide from Seeking Tech to see how to set up this feature for your speakers.

JBL PartyBox TWS Compatibility

When it comes to compatibility, you must use the same speaker model for the True Wireless Stereo connection. The only exception to this rule is the PartyBox 200 and PartyBox 300 as you can connect these two together using TWS.

You can take a look at a list of possible speaker combinations you can use for the True Wireless Stereo mode below:

JBL PartyBox 100 + JBL PartyBox 100
JBL PartyBox 200 + JBL PartyBox 200
JBL PartyBox 200 + JBL PartyBox 300
JBL PartyBox 310 + JBL PartyBox 310
JBL PartyBox 1000 + JBL PartyBox 1000
JBL PartyBox On-The-Go + JBL PartyBox On-The-Go

How to set up TWS on PartyBox 100 and PartyBox On-The-Go

The setup procedures for the JBL PartyBox 100 and PartyBox On-The-Go are the same as you need to take the following steps:

1. First, make sure you have the right combination of speakers. You can only pair JBL PartyBox 100 with another JBL PartyBox 100. You can also only pair the JBL PartyBox On-The-Go with another JBL PartyBox On-The-Go.

2. Next, you need to turn on just one of the two speakers. The speaker you are turning on first will be the default left channel.

3. With the first speaker powered on, you can then turn on your second speaker. This speaker will be the default right channel.

4. With both speakers on, press and hold the Bluetooth button on the first speaker that was powered on for around five second. If done correctly, you should hear a notification chime being played.

5. After hearing the chime, quickly press and hold the Bluetooth button on the second speaker until you hear notification chime coming out of it.

This will enable the True Wireless Stereo.

How to set up TWS on PartyBox 200, 300, 310 and 1000

To set up TWS with the JBL PartyBox 200, 300, 310 or 1000, you need to do the following:

1. First, you need to make sure you have the right speaker combination to set up True Wireless Stereo. The following combos will work with these set of speakers:

JBL PartyBox 200 and JBL PartyBox 200
JBL PartyBox 200 and JBL PartyBox 300
JBL PartyBox 310 and JBL PartyBox 310
JBL PartyBox 1000 and JBL PartyBox 1000

2. Next, you have to turn on both speakers.

3. Press and hold the Bluetooth button on one of the speakers until you hear a chime coming out of it. This should take around five seconds.

4. After hearing the chime, quickly press and hold the other speaker until you hear another chime.

5. The TWS mode will be activated.

6. Once the connection has been established, you can use the L/R button on the speakers to change the speakers to either the left or right channel.

For the JBL PartyBox 310, you can use the L/R button or the Partybox app on your smartphone.

How to disable TWS on JBL PartyBox 100, 200, 300, 310, 1000 and PartyBox On-The-Go

There are the methods to disable the TWS mode on your JBL PartyBox.

The first is to simply turn off one or both of the speakers with the power button.

If you want to leave your speakers powered on, then the second method is to press and hold the Bluetooth button on one of the speakers until True Wireless Stereo is disabled.

How to fix TWS connection issues on PartyBox 100, 200, 300, 310, 1000 and PartyBox On-The-Go

You may encounter issues when it comes to connecting your PartyBox speakers through True Wireless Stereo. You may also run into disconnections. If you are having problems, you can do the following:

Make sure you are using compatible speakers. You can refer to our compatibility list at the top of this article.

You should also make sure you are following the aforementioned steps correctly as you should be pressing and holding the Bluetooth button for only one speaker at a time.

If possible, move the speakers closer together.

Make sure that there aren’t any obstructions in between the two speakers. Obstructions include walls and any body of water.

You should also avoid placing the speakers too close to a Wi-Fi router as the Wi-Fi signal can interfere with the Bluetooth connection.

If you are using other Bluetooth devices, try to turn them off.

Try to use the speakers in an enclosed space as completely opened spaces won’t have any objects for the Bluetooth signal to reflect off of.

About Microphone and Instrument Inputs

When you use a microphone or instrument with the JBL PartyBox speakers in the True Wireless Stereo mode, you will only hear the microphone or instrument coming out on the one speaker it is connected to. There are two ways to get around this issue if you want to use both speakers.

The first is to use an RCA cable. Connect one end to the RCA output to the speaker that is connected to your microphone or instrument. You can connect the other end of the table to the RCA input of the second speaker.

The second method is to use a mixer. You can send the audio source through the mixer and then send the mixed audio signal to both speakers using a wired connection.

Resource:

https://support.jbl.com/us/en/search/?q=tws&f=2

What’s the difference between the JBL Flip 5 and Flip 5 Eco Edition?

by Kevin Chen

JBL has two version of the Flip 5 Portable Waterproof Speaker with the regular edition and the eco edition. So, what are the main differences between these products?

You can find out in this comparison guide.

Quick Summary

Unlike the regular JBL Flip 5, the JBL Flip 5 Eco Edition is built with 90% recycled plastic.

Despite the different materials, the two portable speakers are the same when it comes to features and specifications.

Flip 5 vs. Flip 5 Eco Edition Comparison Chart

You can check out Seeking Tech’s comparison table between the two portable speakers below.

	JBL Flip 5 Portable Waterproof Speaker	JBL Flip 5 Eco Edition Portable Waterproof Speaker
What’s in the Box	1x JBL Flip 5 Portable Waterproof Speaker 1x Type C USB cable 1x Quick Start Guide 1x Warranty Card 1x Safety Sheet	1x JBL Flip 5 Eco Edition Portable Waterproof Speaker 1x Type C USB cable 1x Quick Start Guide 1x Warranty Card 1x Safety Sheet
Weight	540 grams	540 grams
Dimension	181 mm x 69 mm x 74mm	181 mm x 69 mm x 74mm
Bluetooth Version	Bluetooth 4.2	Bluetooth 4.2
Bluetooth Profiles	A2DP V1.3 AVRCP V1.6	A2DP V1.3 AVRCP V1.6
Bluetooth Transmitter Power	0 dBm to 11 dBm	0 dBm to 11 dBm
Bluetooth Transmitter Frequency Range	2.402 GHz to 2.480 GHz	2.402 GHz to 2.480 GHz
Bluetooth Transmitter Modulation	π/4 DQPSK 8DPSK GFSK	π/4 DQPSK 8DPSK GFSK
Transducer	44 mm x 80 mm	44 mm x 80 mm
Frequency Response	65 Hz to 20 kHz	65 Hz to 20 kHz
Signal-to-Noise Ratio	Less than 80 dB	Less than 80 dB
Rated Power	20W RMS	20W RMS
PartyBoost	Supported	Supported
Waterproof	IPX7	IPX7
Battery Type	Lithium-Ion Polymer 17.28 Wh	Lithium-Ion Polymer 17.28 Wh
Battery Life	Up to 12 hours	Up to 12 hours
Battery Charge Time	Around 2.5 hours over 5V/3A	Around 2.5 hours over 5V/3A
Eco Friendly Design?	No	Yes
Pricing	Check price on Amazon.(#CommissionsEarned)	Check price on Amazon.(#CommissionsEarned)

What’s in the Box

In addition to the main portable speaker unit, each product comes with a USB cable, quick start guide, warranty card and safety sheet.

You can find a full breakdown of what’s included in each box below:

JBL Flip 5:

1x JBL Flip 5 Portable Waterproof Speaker
1x Type C USB cable
1x Quick Start Guide
1x Warranty Card
1x Safety Sheet

JBL Flip 5 Eco Edition

1x JBL Flip 5 Eco Edition Portable Waterproof Speaker
1x Type C USB cable
1x Quick Start Guide
1x Warranty Card
1x Safety Sheet

Weight

The regular and eco editions weigh the same, which is around 540 grams.

Dimension

The two Bluetooth speakers in this versus guide are also identical in physical size.

You can find the full measurements, which is displayed in Width x Depth x Height, below:

181 mm x 69 mm x 74mm

Bluetooth Version

Both the JBL Flip 5 and JBL Flip 5 Eco Edition use Bluetooth 4.2 for wireless connection.

Bluetooth Profiles

The two portable speakers support the following Bluetooth profiles:

A2DP V1.3
AVRCP V1.6

Bluetooth Transmitter Power

The regular and eco-friendly versions also have the same Bluetooth transmitter power with a range of 0 dBm to 11 dBm.

Bluetooth Transmitter Frequency Range

The Bluetooth transmitter frequency range is the same at 2.402 GHz to 2.480 GHz.

Bluetooth Transmitter Modulation

Furthermore, the two JBL wireless speakers support the following Bluetooth transmitter modulations:

π/4 DQPSK
8DPSK
GFSK

Transducer

The two versions of the Flip 5 have the same transducer size at 44 mm x 80 mm.

Frequency Response

The frequency response range is identical at 65 Hz to 20 kHz. So, both of these portable speakers struggle when it comes to replicating low frequency bass sound output.

Signal-to-Noise Ratio

The Flip 5 and Flip 5 Eco Edition have a signal-to-noise ratio, which measures the signal level to the unwanted noise level, of less than 80 dB.

Rated Power

The two versions of the JBL Flip 5 have a power rating of 20W RMS.

PartyBoost

The two editions support PatyBoost, a feature that lets you pair multiple PartyBoost-compatible speakers together to play the same audio content.

Waterproof

Both devices also received a waterproof rating of IPX7 as the two speakers can withstand being submerged underwater at a depth of 1 meter for up to 30 minutes.

Battery Type

The Flip 5 and Flip 5 Eco Edition are equipped with a Lithium-Ion Polymer 17.28 Wh battery, which is the equivalent to a 3.6V 4800 mAh battery.

Battery Life

The battery life for both the of Bluetooth speakers in this versus guide is up to 12 hours. The length could vary based on the volume level as well as the type of audio content being played.

Battery Charge Time

It will take around 2.5 hours over 5V/3A to recharge both the Flip 5 and Flip 5 Eco Edition.

Eco Friendly Design

Unlike the regular JBL Flip 5, the JBL Flip 5 Eco Edition is made of 90% recycled plastic.

Resources:

What’s the difference between JBL Clip 3 and Clip 4?

by Kevin Chen

JBL recently released the Clip 4. So, how does the new version stack up against the older Clip 3?

You can find out in this comparison guide between the two portable Bluetooth speakers.

Quick Summary

When compared to the JBL Clip 3, the JBL Clip 4 uses a more up-to-date Bluetooth connection, which results in having more transmitter power and wider transmitter frequency range.

The newer version also has more powerful speaker output, wider speaker frequency response range and better signal-to-noise ratio.

Last but not least, the Clip 4 provides additional protection against dust and other small particles.

Needless to say, the JBL Clip 4 is a big upgrade over JBL Clip 3 as you will get better wireless connection, sound quality and durability.

JBL Clip 3 vs. JBL Clip 4 Comparison Chart

You can find Seeking Tech’s comparison table for the two mini portable speakers below.

	JBL Clip 3	JBL Clip 4
Weight	220 grams (or 0.490 pound)	239 grams (or 0.527 pound)
Dimensions	137.00 mm x 97.00 mm x 46.00 mm (or 5.4" x 3.8" x 1.8")	134.50 mm x 86.30 mm x 46.00 mm (or 5.3" x 3.4" x 1.8")
Color Options	Black/White Camouflage Desert Sand Dusty Pink Fiesta Red Forest Green Midnight Black Mustard Yellow Ocean Blue River Teal Squad Steel White Stone Grey	Black Blue Grey Pink Red Squad
What’s in the Box	1x Clip 3 Bluetooth speaker 1x Micro USB cable 1x Quick start guide 1x Safety sheet 1x Warranty card	1x Clip 4 Bluetooth speaker 1x Type C USB cable 1x Quick start guide 1x Safety sheet 1x Warranty card
Bluetooth Version	4.1	5.1
Bluetooth Profile	A2DP V1.2 AVRCP V1.5 HFP V1.5 HSP V1.2	A2DP 1.3 AVRCP 1.6
Bluetooth Transmitter Power	0 dBm to 9 dBm	0 dBm to 10 dBm
Bluetooth Transmitter Frequency Range	2.402 MHz to 2480.0 MHz	2.400 MHz to 2483.5 MHz
Bluetooth Transmitter Modulation	GFSK π/4 DQPSK 8DPSK	GFSK π/4 DQPSK 8DPSK
Output Power	3.3 W RMS	5.0 W RMS
Sound Transducer	40 mm	40 mm
Frequency Response	120 Hz to 20 kHz	100 Hz to 20 kHz
Signal-to-Noise Ratio	Less than 80 dB	Less than 85 dB
Battery Type	Lithium-ion polymer (3.700V/1000mAh)	Lithium-ion polymer (3.885V/1000mAh)
Battery Life	Up to 10 hours	Up to 10 hours
Recharge Time	3 hours	3 hours
Dustproof and Waterproof Rating	IPX7	IP67
Pricing	Check price on Amazon.(#CommissionsEarned)	Check price on Amazon.(#CommissionsEarned)

Weight

The JBL CLIP 3 weighs in at 220 grams (or 0.490 pound) while the JBL CLIP 4 is a little bit heavier at 239 grams (or 0.527 pound).

Dimensions

The two portable wireless speakers are pretty similar in size.

You can find the full measurements for both below:

Clip 3: 137.00 mm x 97.00 mm x 46.00 mm (or 5.4″ x 3.8″ x 1.8″)
Clip 4: 134.50 mm x 86.30 mm x 46.00 mm (or 5.3″ x 3.4″ x 1.8″)

Color Options

The older Clip speaker comes with twelve color variants while the newer version currently has six options (although more are expected to be added in the future).

You can check out the available colors for both products below:

JBL Clip 3:

Black/White Camouflage
Desert Sand
Dusty Pink
Fiesta Red
Forest Green
Midnight Black
Mustard Yellow
Ocean Blue
River Teal
Squad
Steel White
Stone Grey

JBL Clip 4:

Black
Blue
Grey
Pink
Red
Squad

What’s in the Box

In addition to the Bluetooth speaker, each product comes with a quick starter guide, safety sheet and warranty card. The Clip 3 comes with a Micro USB cable while the Clip 4 comes with a USB Type-C cable.

You can find a breakdown of what’s included in each box for both products below:

JBL Clip 3:

1x Clip 3 Bluetooth speaker
1x Micro USB cable
1x Quick start guide
1x Safety sheet
1x Warranty card

JBL Clip 4:

1x Clip 4 Bluetooth speaker
1x Type C USB cable
1x Quick start guide
1x Safety sheet
1x Warranty card

Bluetooth Version

The third-generation JBL Clip uses Bluetooth 4.1 for wireless connection while the fourth generation uses the more up-to-date Bluetooth 5.1.

Bluetooth Profile

You can take a look at the support Bluetooth profile for both wireless speakers in this versus guide below:

JBL Clip 3:

A2DP V1.2
AVRCP V1.5
HFP V1.5
HSP V1.2

JBL Clip 4:

A2DP 1.3
AVRCP 1.6

Bluetooth Transmitter Power

The 4th Gen JBL Clip has a higher maximum Bluetooth transmitter power when compared to the previous 3rd Gen version.

You can find the specifications below:

Clip 3: 0 dBm to 9 dBm
Clip 4: 0 dBm to 10 dBm

Bluetooth Transmitter Frequency Range

The newer model also has a wider Bluetooth transmitter frequency range than the older release.

You can find the ranges below:

Clip 3: 2.402 MHz to 2480.0 MHz
Clip 4: 2.400 MHz to 2483.5 MHz

Bluetooth Transmitter Modulation

Both products use the following Bluetooth transmitter modulation:

GFSK
π/4 DQPSK
8DPSK

Output Power

The JBL Clip 3 has a speaker output power of 3.3 W RMS while the JBL Clip 4 can produce a more powerful 5.0 W RMS.

Sound Transducer

The two speakers have the same sound transducer size of 40 mm.

Frequency Response

The fourth generation Clip is capable of producing a lower frequency response range than the third-generation. As a result, the new model can output more accurate lower bass sounds.

You can find the frequency response ranges below:

Clip 3: 120 Hz to 20 kHz
Clip 4: 100 Hz to 20 kHz

Signal-to-Noise Ratio

Signal-to-Noise Ratio (also known as SNR and S/N) is a comparison between the power of a signal in relations to the level of unwanted noise that accompanies that signal.

The JBL Clip 3 has a Signal-to-Noise Ratio of less than 80 dB while the JBL Clip 4 has a ratio of less than 85 dB.

As a result, the fourth-generation speaker can provide better sound quality than the older version.

Battery Type

The JBL Clip 4 has a higher internal battery capacity than the JBL Clip 3.

You can find the specs for both batteries below:

Clip 3: Lithium-ion polymer (3.700V/1000mAh)
Clip 4: Lithium-ion polymer (3.885V/1000mAh)

Battery Life

When it comes to the battery life, both portable speakers can last up to 10 hours.

The actual playtime could vary based on the volume level as well as the audio content being played.

Recharge Time

Both batteries should take around 3 hours to recharge.

Dustproof and Waterproof Rating

The JBL Clip 3 has an IP rating of IPX7, which means that it can be submerged at up 1 meter underwater for up to 30 minutes. The speaker provides no protection against dust or other small particles.

The JBL Clip 4 has an IP67 as it can also be submerged underwater at a depth of up to 1 meter for a maximum of a half an hour. The newer model also provides full protection against dust and other small particles.

Resources: