Hisense U7H

Recommended Hisense U7H settings for PS5, Xbox Series X and S

by

The U7H is a 2022 4K Quantum ULED TV. You can follow this guide at Seeking Tech to see what recommended settings you should use for this Hisense television set in order to optimize it for the PlayStation 5, PlayStation 5 Digital Edition, Xbox Series X and Xbox Series S.

Before we begin, it should be noted that this optimization tutorial should cover the following screen sizes of this TV series:

  • 55″ Hisense U7H (55U7H)
  • 65″ Hisense U7H (65U7H)
  • 75″ Hisense U7H (75U7H)
  • 85″ Hisense U7H (85U7H)

Supported PS5 Features

With the U7H, you will be able to play games at 120 frames per second in 1080p, 1440p and 4K on the PlayStation 5 and PlayStation 5 Digital Editions system. This Hisense television also supports HDR10 and Variable Refresh Rate.

Supported Xbox Series X and Xbox Series S Features

You can use the U7H to play Xbox Series X and Xbox Series S games at up to 120 fps as well in 1080p, 1440p and 4K. This 2022 4K Quantum ULED TV also supports HDR10, Dolby Vision and VRR for these Microsoft consoles.

Recommended Settings

1. To start off, you need to connect your console to the U7H if you haven’t done so already.

You need to use the HDMI 2.1 cable that came your PlayStation 5, PlayStation 5 Digital Edition or Xbox Series X and then connect it to either the HDMI #3 or HDMI #4 port of the television screen.

The Xbox Series S only comes with a HDMI 2.0 cable; therefore, you can connect it to any of the four HDMI ports of the U7H. You can also get your own HDMI 2.1 cable and then connect the console to either the third or fourth HDMI ports of the Hisense television.

2. If you haven’t done so already, make sure you update your TV to the latest available firmware.

To download a new software version, press the gear button on the remote and then navigate over to Settings > System > About > System Update menu.

3. Next, you need to press the button that has the square icon with two horizontal lines inside on the TV remote.

Afterwards, select the HDMI port that is connected to your game console and the change its HDMI Format to Enhanced Format.

4. The next step you can take is to make sure that the U7H’s game mode is enabled.

In order to do so, press the gear button on the remote and then go to Settings > Display & Sound > Picture > Picture Mode. From there, make sure that Game is selected.

By enabling Game Mode, the Variable Refresh Rate of the TV set should also be automatically turned on as well.

5. We also recommend turning on Instant Game Response, which will enable the Auto Low Latency Mode.

To do so, press the gear button again and then head over to Settings > Display & Sound > Picture > Advanced Settings > Instant Game Response.

6. Next, you should make sure that you disable the Automatic Light Sensor. You can find this feature by going to Settings > Display & Sound > Picture > Backlight > Automatic Light Sensor.

7. You should now be done optimizing the Hisense U7H for the PlayStation 5, PlayStation 5 Digital Edition, Xbox Series X and Xbox Series S.

While there are other settings available, we recommend that you leave them alone for now. Of course, you can play with these options later if you would like.

8. After setting up your U7H, you should make sure that you have the right settings on your console as well.

If you have a PS5 or PS5 Digital Edition, you need to head over to Settings > Screen and Video > Video Output.

In this menu, make sure you match the following settings:

  • Resolution: 2160p
  • HDR: On When Supported
  • VRR: Automatic
  • 120 Hz: Automatic
  • ALLM: Automatic
  • 4K Transfer Rate: Automatic
  • Deep Color Output: Automatic
  • RGB Range: Automatic

Finally, go to Adjust HDR from the Video Output menu. Next, follow the on-screen instructions to calibrate the HDR output of your PS5 to the U7H.

If you have an Xbox Series X or Xbox Series S, then you should head over to General > TV & Display Options > Video Modes.

In this menu, you should make sure you enable the following:

  • Allow Auto-Low Latency Mode
  • Allow Variable Refresh Rate
  • Allow 4K
  • Allow HDR10
  • Allow Dolby Vision
  • Dolby Vision for Gaming

Once you are done, go back to General > TV & Display Options and then select Calibrate HDR. Finally, follow the on-screen instructions to optimize the console’s HDR output for the Hisense U7H.

Hisense U7H wall mount specs

by

For 2022, Hisense updated its U7 series with the new U7H model. If you would like to mount this 4K Quantum ULED TV to a wall, then you can check out this compatibility guide to see which mounting brackets are supported.

Screen Sizes

There are currently four size variants of the U7H brand as you should have a 55-inch, 65-inch, 75-inch or 85-inch screen. You can find the model number for each size below:

  • 55″ Hisense U7H 4K Quantum ULED TV (55U7H)
  • 65″ Hisense U7H 4K Quantum ULED TV (65U7H)
  • 75″ Hisense U7H 4K Quantum ULED TV (75U7H)
  • 85″ Hisense U7H 4K Quantum ULED TV (85U7H)

The aforementioned U7H model numbers are for the U.S. region and may be different if you purchased your television set from another region.

Dimensions

Dimensions without Stand (in inches):

  • 55″ Hisense U7H: 48.3 inches × 28.2 inches × 3.5 inches
  • 65″ Hisense U7H: 57.0 inches × 33.1 inches × 3.5 inches
  • 75″ Hisense U7H: 66.1 inches × 38.1 inches × 3.3 inches
  • 85″ Hisense U7H: 74.9 inches × 43.1 inches × 3.7 inches

Dimensions without Stand (in centimeters):

  • 55″ Hisense U7H: 122.7 cm x 71.6 cm x 8.9 cm
  • 65″ Hisense U7H: 144.8 cm x 84.1 cm x 8.9 cm
  • 75″ Hisense U7H: 167.9 cm x 96.8 cm x 8.4 cm
  • 85″ Hisense U7H: 190.3 cm x 109.5 cm x 9.4 cm

Dimensions without Stand (in millimeters):

  • 55″ Hisense U7H: 1226.8 mm x 716.3 mm x 88.9 mm
  • 65″ Hisense U7H: 1447.8 mm x 840.7 mm x 88.9 mm
  • 75″ Hisense U7H: 1678.9 mm x 967.7 mm x 83.8 mm
  • 85″ Hisense U7H: 1902.5 mm x 1094.7 mm x 94.0 mm

Weight (without Stand)

Weight without Stand (in pounds):

  • 55″ Hisense U7H: 32.4 lbs.
  • 65″ Hisense U7H: 43.0 lbs.
  • 75″ Hisense U7H: 76.3 lbs.
  • 85″ Hisense U7H: 90.4 lbs.

Weight without Stand (in kilograms):

  • 55″ Hisense U7H: 14.7 kg
  • 65″ Hisense U7H: 19.5 kg
  • 75″ Hisense U7H: 34.6 kg
  • 85″ Hisense U7H: 41.0 kg

VESA Mounting Pattern

The screw holes of the wall mount must match with the four mounting screw holes located on the back of your U7H. The measurement of the horizonal and vertical distances of these screw holes are known as the Vesa Mounting Pattern or the VESA Hole Pitch.

The 55-inch and 65-inch variants have the same distances at 300 mm x 200 mm. The 75-inch and 86-inch versions have wider and taller patterns when compared to the smaller screen sizes, however.

You can find the VESA Mounting Patterns for all four screen sizes below:

  • 55″ Hisense U7H: 300 mm x 200 mm
  • 65″ Hisense U7H: 300 mm x 200 mm
  • 75″ Hisense U7H: 600 mm x 300 mm
  • 85″ Hisense U7H: 600 mm x 400 mm
VESA Mounting Pattern (example from different TV).

Screw Type

When installing the mounting bracket on your Hisense U7H, you need to use the M6 screw type if you have a 55-inch or 65-inch version. For the 75-inch and 85-inch versions, you need to use the M8 screw type instead.

What wall mounts are compatible with the Hisense U7H?

If you are looking for a compatible mounting bracket for your U7H, then it needs to support the VESA Mounting Pattern and weight of the television set. These factors will vary depending on the screen size of your Hisense Quantum ULED TV.

You should also make sure you are using the right screw type when screwing in the mounting bracket to the back of the screen.

If you are looking for specific recommendations when it comes to finding a compatible fixed, tilting or full motion wall mount for the Hisense U7H, then you can check out this article.

Resource: