How to adjust the field of view in Dragon’s Dogma 2

If you want to adjust the field of view in Dragon’s Dogma 2, then you can check out this Seeking Tech guide.

1. Start by opening the pause menu and then selecting the System option.

2. You then need to select Camera.

3. Scroll down until you get to Camera Distance.

4. You can use the slider to adjust the field of view. Moving it to the right will move the camera further back, while moving it to the left will bring the camera closer.

On the right side, you should see a preview of the camera angle.

5. Once you are done, exit he pause menu and return to playing the game.

How to disable adaptive triggers in Dragon’s Dogma 2

Dragon’s Dogma 2 will automatically enabled adaptive triggers if you are playing the game with a DualSense controller. To see how you can disable the resistance from the L2 and R2 buttons, you can take a look at this tutorial from Seeking Tech.

1. Open the pause menu and then select System.

2. In the System menu, select Controls.

3. You should find the Adaptive Triggers option in the next screen with the following description:

Select whether or not to enable the trigger effect function when aiming the bow.

4. Make sure that Adaptive Triggers option is set to Off.

How to disable injuries in MLB The Show 24

Injuries can derail a baseball season, in real life as well as in MLB The Show 24. Thankfully, you can turn off injuries in the videogame. To find out how you can properly do so, you can take a look at this guide at Seeking Tech.

1. Head into the Settings menu of MLB The Show 24.

2. Select Gameplay from the Settings screen.

3. Go to the General section if you aren’t there already.

4. Use the L2/R2, LT/RT or ZL/ZR buttons to change tabs until you get to the Rules section.

5. From there, set Injuries to Off.

6. Exit the Settings menu and select Apply Changes when asked.

How to turn on perfect umpiring in MLB The Show 24

If you watch a lot of baseball, then you should know how bad umpiring can ruin a game. By default, the virtual umpires in MLB The Show 24 are imperfect. You can check out this guide at Seeking Tech to see how you can make every call perfect.

1. Go to the Settings menu in MLB The Show 24.

2. Select Gameplay

3. Switch tabs until you get to Rules.

You need to use the L2/R2 buttons on PlayStation LT/RT buttons on Xbox or ZL/ZR buttons on Switch to change tabs.

4. In the Rules tab, set Umpire Accuracy to Perfect so that you don’t have to worry about any missed calls when it comes to the strike zone.

5. Afterwards, set Umpire Close Plays to Perfect so that all there won’t be any mistakes when it comes to on-field calls.

6. Try to exit the Settings menu. When asked, select Apply Changes.

Can MLB The Show 24 be played offline?

MLB The Show 24 recommends that you connect to its online server so that you can unlock full access to the game. With that said, the game is still playable offline.

If the servers are done, or your console can’t connect to the Internet, then the following modes and features will be locked out in this PlayStation 4, PlayStation 5, Nintendo Switch, Xbox One and Xbox Series baseball game:

  • Diamond Dynasty
  • Storylines
  • Challenge of the Week
  • Player Inventory and Packs
  • The Show Shop
  • Daily Login Bonuses
  • Daily Lineups

If you want to unlock these again, make sure you connect to the online server of MLB The Show 24.

How to enable automatic fielding and baserunning in MLB The Show 24

If you simply want to pitch and hit in MLB The Show 24, then you can enable automatic fielding and baserunning. To find out how you can do so, you can take a look at this guide from Seeking Tech.

1. To start off, open up the Settings menu in The Show 24.

2. From there, select Gameplay.

3. On the Gameplay screen, switch over to Decisions.

You can change tabs by using the L2 and R2 buttons on PlayStation, RT and LT buttons on Xbox and ZL and ZR buttons on Switch.

4. In the Decisions section, you will be able to turn on the following:

  • Auto Fielding
  • Auto Throwing
  • Auto Baserunning
  • Auto Sliding
  • Auto INF Jump Reaction
  • Auto INF Dive Reaction

5. Exit the Settings menu. You should get a notice saying that the configurations have been modified.

Select the Apply Changes option.

How to change the field of view in Sea of Thieves

If you don’t like the default camera distance in Sea of Thieves, then you can change it. You can check out this guide at Seeking Tech to see how you can adjust the field of view for this PC, Xbox and PlayStation 5 pirate game.

1. To start off, go to the Settings menu.

2. From there, select Graphics Settings on the left side.

3. On the right side, select Field of View.

4. By default, the FoV is set to 78. You will be able to adjust it anywhere between the range of 60 to 90.

Keep in mind that doing so may affect the frame rate, as the game warns:

Increasing the field will render more content on-screen, which may impact performance.

5. Once you are done, exit the Settings menu and then try out the new FoV angle in Sea of Thieves. Return to Settings > Graphics Settings > Field of View if you need to make any additional adjustments.

How to turn off motion blur and screen shake in Sea of Thieves

Motion blur and screen shake are enabled by default in Sea of Thieves. You can check out this tutorial at Seeking Tech to see how you can disable these visual effects in the PC, Xbox One, Xbox Series and PlayStation 5 videogame.

1. To start off, head over to the Settings menu.

2. From there, go to Graphics Settings.

3. On the right side, you should see Disable Blur. Make sure it is set to On.

4. You should also see the Disable Screen Shake setting. Make sure this is also set to On.

5. Exit the Settings menu.

You should no longer see any motion blurring and camera shaking in Sea of Thieves.

How to fix brightness issues in Dragon’s Dogma 2

If you find certain areas in Dragon’s Dogma 2 to be too dark, while others to be too bright, then you can check out this guide at Seeking Tech to see how you can potentially fix this issue.

1. If you are playing in HDR, then you can try re-calibrating the HDR brightness output.

On the PlayStation 5, you can do so by going to the Settings menu of the console and then heading over to Screen and Video > Video Output > Adjust HDR.

If you are playing Dragon’s Dogma 2 on Xbox Series X or Xbox Series S, go to the console’s Settings menu and then select Settings > General > TV & display options > Calibrate HDR for games.

Follow the on-screen instructions to calibrate the HDR brightness.

2. There is also a brightness slider that you can use in the game. To find it, open the Options menu and then select Display > Brightness.

On the next screen, you will be able to adjust the in-game brightness. Follow the on-screen instructions to change the slider until the black box is barely visible.

3. You can also try playing the game with HDR disabled. To do so, disable HDR on the system’s settings menu as well as your TV settings menu.

How to change the voice language in Dragon’s Dogma 2

Dragon’s Dogma 2 support both English and Japanese voice overs. To see how you can switch between the two in this action role-playing game, you can check out this tutorial at Seeking Tech.

1. To start off, make your way over to the Options menu.

2. From there, select Language on the left column.

3. On the right side of the same menu, move the cursor down to Voice Language. You should see the following description:

Change the voice playback language.

4. Switch the language and then exit.

5. When asked if you want to save the change you just made, select Yes.

The voice acting should now be switched over to your preferred language.