How to enable VRR on the Sony X90J, X95J, A80J, A90J and Z9J

Sony has added Variable Refresh Rate support to the X90J, X95J, A80J, A90J and Z9J television series. To see how you can use this feature, you can take a look at this tutorial from Seeking Tech.

Before we start, it should be noted that this guide will be based on the following Sony Bravia television models:

  • 50″ X90J (XR-50X90J)
  • 55″ X90J (XR-55X90J)
  • 65″ X90J (XR-65X90J)
  • 75″ X90J (XR-75X90J)
  • 65″ X95J (XR-65X95J)
  • 75″ X95J (XR-75X95J)
  • 85″ X95J (XR-85X95J)
  • 55″ A80J (XR-55A80J)
  • 65″ A80J (XR-65A80J)
  • 77” A80J (XR-77A80J)
  • 55″ A90J (XR-55A90J)
  • 65″ A90J (XR-65A90J)
  • 83″ A90J (XR-83A90J)
  • 75″ Z9J (XR-75Z9J)
  • 83″ Z9J (XR-85Z9J)

What is the Variable Refresh Rate feature for X90J, X95J, A80J, A90J and Z9J?

Variable Refresh Rate, or VRR, sync the refresh rate of the input source to the refresh rate of your television set. As a result, this feature will help smooth out games that run at an inconsistent frame rate as well as eliminate screen tearing.

VRR is currently support by the latest graphics cards on the PC as well as the Xbox Series X and Xbox Series S consoles. The PlayStation 5 and PlayStation 5 Digital Edition will also support this feature if it hasn’t already by the time you are reading this article.

Updating the Sony X90J, X95J, A80J, A90J and Z9J to firmware version 6.5660

If you haven’t done so already, you will need to update the firmware of your television set in order to add Variable Refresh Rate support to your X90J, X95J, A80J, A90J or Z9J. The fastest way to do so is by connecting your Sony TV to the internet.

If you previously enabled the “Automatically check for update” feature, then you should get a notification. Otherwise, you need to the press the gear button on your TV remote to open the Quick Settings menu. Afterwards, you need to select Settings, then System, then System software update and, finally, Software update.

You can also update the firmware of your television set through the USB port although it is a lot more complicated than simply downloading the file directly on your TV.

Variable Refresh Rate was added to the X90J, X95J, A80J, A90J and Z9J on the firmware version 6.5660. Along with VRR support, this update also contains the following improvements:

  • Built-in mic sensitivity setting for TVs with built-in microphone
  • Dolby Atmos and 4K mirroring for AirPlay Mirroring
  • Improved audio output switching in Quick Settings
  • General performance improvements

During the firmware installation, make sure you don’t turn off your Sony television. Otherwise, you risk potentially damaging your TV.

How to enable VRR on X90J, X95J, A80J, A90J and Z9J

After updating the firmware of your television set to at least 6.5660, you then need to manually enable Variable Refresh Rate support by taking the following steps:

1. Once the firmware has been updated, you next to make sure you are connecting your PlayStation 5, PlayStation 5 Digital Edition, Xbox Series S, Xbox Series X or compatible PC to a HDMI 2.1 port on your television.

2. You also need to be using a HDMI 2.1 cable. The PlayStation 5, PlayStation 5 Digital Edition and Xbox Series X come with HDMI 2.1 included in the box.

If you have a PC or Xbox Series S, however, then you might need to buy one. Microsoft’s Series X only comes with a HDMI 2.0 cable.

If you are looking for a HDMI 2.1 cable, then we recommend picking up the Monoprice 8K Certified Braided Ultra High Speed HDMI 2.1 Cable, which you can find on Amazon with this link. (#CommissionsEarned).

Once you are done setting everything up, press the gear button on your remote once again.

4. In the Quick Settings menu, select Settings.

5. Inside of Settings, select Channels & Inputs.

6. In the Channels & Inputs, select External inputs.

7. After getting to the “External inputs” menu, select HDMI signal format.

8. In the “HDMI signal format” menu, select the HDMI 2.1 port that is connected to your PS5, PS5 Digital Edition, Xbox Series X, Xbox Series S or compatible PC.

9. In the next screen, you need to select Enhanced format (VRR).

10. You may also need to enable Variable Refresh Rate on the menus of your game console or PC.

By enabling Variable Refresh Rate, you should be able to get rid of a vast majority of frame rate and screen tearing issues on your Sony Bravia X90J, X95J, A80J, A90J or Z9J.

However, this format will also lock you into the Game Picture Mode in addition to restricting you from using picture quality features like black frame insertion and noise reduction.

Sony A80J and A90J wall mount specs

The A80J and A90J are two new BRAVIA XR OLED 4K Ultra HD television sets released by Sony in 2021.

If you want to mount these TVs on a wall, then you can follow this Seeking Tech guide.

Models

This wall mount guide will cover the following television models:

  • 55” Sony A80J BRAVIA XR OLED 4K Ultra HD TV (XR-55A80J)
  • 65” Sony A80J BRAVIA XR OLED 4K Ultra HD TV (XR-65A80J)
  • 55” Sony A90J BRAVIA XR MASTER Series OLED 4K Ultra HD TV (XR-55A90J)
  • 65” Sony A90J BRAVIA XR MASTER Series OLED 4K Ultra HD TV (XR-65A90J)

Mounting Specs

You can take a look at the mounting specs for the different models below:

55” A80J TV

  • Weight without Stand: 39.3 lbs. (or 17.8 kg)
  • Dimensions without Stand: 48.38 x 28.13 x 2.13″ (or 1,227 mm x 712 mm x 53 mm)
  • VESA Spacing: 300 mm x 300 mm

65” A80J TV

  • Weight without Stand: 49.2 lbs. (or 22.3 kg)
  • Dimensions without Stand: 57.13” x 33.00” x 2.13″ (or 1,448 mm x 836 mm x 53 mm)
  • VESA Spacing: 300 mm x 300 mm

55” A90J TV

  • Weight without Stand: 41 lbs. (or 18.6 kg)
  • Dimensions without Stand: 48.15” x 27.91” x 1.61″ (or 1,223 mm x 709 mm x 41 mm)
  • VESA Spacing: 300 mm x 300 mm

65” A90J TV

  • Weight without Stand: 49.6 lbs. (or22.5 kg)
  • Dimensions without Stand: 56.85” x 32.80” x 1.62″ (or 1,444 mm x 833 mm x 41 mm)
  • VESA Spacing: 300 mm x 300 mm

For the uninformed, VESA spacing measures the horizontal and vertical distances between the four mounting screw holes located on the back of the A80J and A90J.

VESA Mounting Pattern (example from different TV).

Official A80J and A90J TV wall mount

Sony does have an official product, with the SU WL855 Wall-Mount Bracket, that is compatible with the A80J and A90J televisions.

When installed with this mount, your OLED TV will be just 0.86 inch away from the wall. You can also swivel your A80J or A90J a little bit at up to 21 degrees to the left or right.

When it comes to the installation process, the SU-WL855 makes installing easier with its lateral shift bracket and magnetic lock system.

If you are interested, you can purchase the Sony mount on Amazon with the following link:

If you would rather get something else, then you can take a look at our other recommendations below.

Compatible fixed wall mount

If you are looking for a mount to simply keep your A80J or A90J in place, then we recommend taking a look at the ECHOGEAR’s EGLL1-BK Low Profile Fixed TV Wall Mount.

By using this mount, your 2021 Sony OLED will be sitting at 1.25 inch away from the wall.

The EGLL1-BK fits the 300 mm x 300 mm VESA spacing. Since it can also hold up to 150 lbs. as well, this mount is compatible with all the screen sizes of the A80J and A90J.

The ECHOGEAR product uses a click lock security system to make sure the TV is securely installed. It also uses quick-release pull strings for easy removal.

The mount can be installed concrete, wood studs that are 16 inches apart or wood studs that are 24 inches apart.

If you are interested, you can purchase the fixed mount on Amazon with the following link:

Compatible tilt wall mount

If you are planning to mount your A80J or A90J up high up the wall and above your normal sight line, then we recommend picking up a tilt mount such as Sanus’ VLT6-B1 Advanced Tilt Premium TV Wall Mount.

With this product, your Sony OLED can be extended a maximum of up to 5.7 inches away from the wall. This will give you enough room to tilt your television set at up to 12 degrees downwards or upwards.

The VLT6-B1 supports the 300 mm x 300 mm VESA distance and can hold up to 150 lbs. So, it should be compatible with all screen sizes of the A80J and A90J.

The Sanus VLT6-B1 can be installed on concrete walls or wall with wood studs that are spaced 16 inches to 24 inches apart. The product also supports post-installation leveling and horizontal shifting.

You can purchase our recommended tilting mount, if you are interested, on Amazon via the following link:

Compatible articulating wall mount

If you prefer to view your A80J or A90J from various positions, then you should get a mount that is capable of swiveling. If you interested in doing so, then we recommend checking out the VideoSecu’s MP830B Articulating TV Mount.

With this product, you will be able to extend your 2021 Sony OLED from 2.75 inches to wall the way out at up to 25 inches from the wall. You can then be able to swivel your TV up to 70 degrees to the left or up to 70 degrees to the right.

Not to mention that you will also be able to tilt at a maximum of 15 degrees upwards or downwards.

The MP830B can be installed on wood studs that are 16 inches apart. After installation, you can re-level your TV display.

If you are interested, you can purchase the full motion mount with the following Amazon link: