Samsung TU9010

Samsung TU9010 wall mount specs

by

The TU9010 is a new Crystal UHD 4K Smart TV released by Samsung in 2021. You can check out this guide at Seeking Tech to find the most suitable wall mounts for this massive 86-inch television set.

Mounting Specs

You can find the mounting specifications for the Samsung TU9010 below:

  • Dimensions without Stand: 75.8″ x 43.3″ x 2.2″
  • Weight without Stand: 90.6 lbs.
  • VESA Wall Mount Support: 600 mm x 400 mm

For the uninformed, the VESA Wall Mount Support refers to the horizontal and vertical distances in between the four mounting screw holes located on the back of the TU9010.

VESA Mounting Pattern (example from different TV).

Compatible fixed mount

If you are searching for a simple fixed mount for your Samsung TU9010, then we recommend taking a look at the EGLL2 Low Profile Design Wall Mount from ECHOGEAR.

When used with this mount, your 86” television set will sit at 2.25″ away from the wall. This product also features post-installation leveling, as you can re-level the screen at a maximum of 5 degrees in either direction.

The ECHOGEAR EGLL2 is designed to fit the 600 mm x 400 mm VESA Wall Mount specification and should be able to hold a maximum weight of 150 pounds. Therefore, this product is compatible with the 86″ Samsung TU9010 Crystal UHD 4K Smart TV.

When it comes to walls, the EGLL2 can be installed on concrete, studs that are 16” apart as well as studs that are 24” apart.

If you are interested, you can purchase our recommended fixed mount with the following Amazon link:

Compatible tilt mount

Being able to tilt your mounted TU9010 will reduce glare and help optimize viewing angles. If you are interested in taking advantage of this feature, then we suggest picking up the EGLT3 Low Profile Design Tilting TV Wall Mount from ECHOGEAR.

By using this mount, your Samsung Crystal television will sit at 2.3” away from the wall. The little bit of extra space will let you tilt the screen at a maximum of 10 degrees downwards.

You will also be able to adjust the level of your TV set after the installation without having to re-installed the mount again. Moreover, you can shift the screen horizontally at up to 5.4” to the left or right side.

The ECHOGEAR EGLT3 fits with the 600 mm x 400 mm VESA Wall Mount spec with a weight limit of up to 135 pounds. Thus, it should be compatible with the Samsung TU9010.

The EGLT3 can be installed on concrete in addition to studs that are 16” to 24” apart.

You can purchase our recommended tilt mount, if you are interested, on Amazon via the following link:

Compatible full motion mount

Swiveling will help you get good viewing angles if you want to watch your TU9010 from many different locations in a room. If you want to use this feature, then we suggest getting the PSXFK1 Full Motion TV Wall Mount Bracket from PERLESMITH.

With this bracket, your Samsung TV set will sit at 3.07” away from the wall when fully retracted. The screen can extend all the way out to 23.62” away from the wall.

Thanks to the extension, you will be able to swivel the TU9010 at a maximum of 60 degrees to the left or right. Furthermore, you can also tilt your TV down at a maximum of 15 degrees or up at a maximum of 5 degrees.

Last but not least, you will be able to adjust the level of your television, at a maximum of 3 degrees in either direction, after the initial installation process.

The PERLESMITH PSXFK1 should be compatible with the Samsung TU9010 as it supports the 600 mm x 400 mm VESA Wall Mount spec and weights of up to 132 pounds.

For installation, you can put this full motion mount on brick, concrete in addition to studs that are 16” to 24” apart.

You can purchase our recommended swiveling mount, if you are interested, from Amazon with the following link: