In order to instantly print photos and pictures with the Fujifilm Instax Mini EVO, you will need to use a compatible film. To see how you can add, load and insert film to this camera, you can take a look at this tutorial from Seeking Tech.
What film is compatible with the Fujifilm Instax Mini EVO?
The Fujifilm Instax Mini EVO should be compatible with the Fujifilm Instax Mini Packs. The following variations will work with this camera:
- AIRMAIL Instax Mini Film Pack
- Black Instax Mini Film Pack
- BLUE MARBLE Instax Mini Film Pack
- Candy Pop Instax Mini Film Pack
- COMIC Instax Mini Film Pack
- CONFETTI Instax Mini Film Pack
- CONTACT SHEET Instax Mini Film Pack
- HELLO KITTY Instax Mini Film Pack
- MACARON Instax Mini Film Pack
- MERMAID TAIL Instax Mini Film Pack
- MONOCHROME Instax Mini Film Pack
- PINK LEMONADE Instax Mini Film Pack
- Rainbow Instax Mini Film Pack
- SHINY STAR Instax Mini Film Pack
- Stained Glass Instax Mini Film Pack
- STONE GRAY Instax Mini Film Pack
- STRIPE Instax Mini Film Pack
- SKY BLUE Instax Mini Film Pack
- White Instax Mini Film Pack
How to add, load and insert film to Fujifilm Instax Mini EVO
In order to add, load and insert film to the Fujifilm Instax Mini EVO Instant Camera, you can take the following steps:
1. Make sure that your camera is charged.
2. If you haven’t done so already, turn off your camera.
3. Remove the Instax Mini Film Pack from the packaging.
4. Lay your Instax Mini EVO camera down so that the camera screen is facing upwards.
5. Slide the film door lock to open the back cover of the camera. Be careful that you don’t scratch, crack or damage the screen as the cover will fling open.
6. Insert the Instax Mini Film Pack into the camera, make sure that the yellow marks are aligned with each other.
7. After inserting the film, close the film door of the Instax Mini EVO.
8. The camera should then automatically eject the black film protective cover of the Instax Mini Film Pack.
If it doesn’t, make sure that the Fujifilm Instax Mini EVO is charged and turned off. You can then open the film door cover, wait at least two seconds and then close the film door cover to trigger the ejection.
How to remove a used film pack from the Fujifilm Instax Mini EVO
In order to remove a used Instax Mini Film Pack from the Fujifilm Instax Mini EVO Instant Camera, you can try taking the following steps:
1. If you haven’t done so already, turn off the camera.
2. Lay the camera down so that the camera screen is facing up.
3. Slide the film door lock to open the back cover of the camera.
4. Use your fingers to grab the two rectangular holes of the used Instax Mini Film Pack.
5. Lift the used Instax Mini Film Pack out of the camera.
6. If you want to use a new film pack, then now may be a good time to add it in the camera.
6. Close the film door of the Instax Mini EVO.