The A1 is a new OLED model released by LG in 2021. You can follow this guide at Seeking Tech to find what the most suitable options are for mounting LG A1 on a wall.
Mounting Specifications
You can take a look at the dimensions (without stand), weight (without stand) and VESA space (which is the horizontal and vertical distances of the four mounting screw holes you find at the back of your TV) for the A1 below:
LG A1 55-inch Class 4K Smart OLED TV:
- Dimensions without Stand: 48.3″ x 27.8″ x 1.8″
- Weight without Stand: 40.6 Ibs.
- VESA Space: 300 mm x 200 mm
LG A1 65-inch Class 4K Smart OLED TV:
- Dimensions without Stand: 57.0″ x 32.7″ x 1.8″
- Weight without Stand: 52.2 lbs
- VESA Space: 300 mm x 200 mm
Compatible fixed wall mount
If you are looking for a simple wall mount for your A1 without any extra frills, then we recommend checking out the MD2163-K Fixed TV Mount from Mounting Dream.
When paired with the 2021 LG OLED, the mount will give you a low profile look as the screen will be sitting at just 1.2” away from the wall.
The MD2163-K has a VESA mounting range of 200 mm x 100 mm to 600 mm x 400 mm, which includes the 300 mm x 200 mm pattern. Its heavy-duty steel frame can also hold up to 132 pounds. Therefore, it should be compatible with the 55-inch and 65-inch versions of the LG A1 4K Smart OLED TV.
You can install the MD2163-K, which comes with a bubble level tool, on concrete in addition to studs with distances that are 16”, 18” or 24” apart.
If you are interested, you can purchase our recommended fixed mount on Amazon with the following link:
- Mounting Dream MD2163-K Fixed TV Mount(#CommissionsEarned)
Compatible tilting wall mount
You may also want to consider getting a mount with a tilting feature as it provides better viewing and prevents screen glares if you decide to put your LG A1 on the higher side of a wall.
If you are interested in getting one, then we recommend taking a look at the PILTK4 Tilt TV Wall Mount Bracket from Pipishell. With this product, your OLED television will be sitting at 1.5” away from the wall.
By using its dual hooks with anti-drop design, you will be able to tilt the television set a maximum of 7 degrees downwards.
The PILTK4 supports the 300 mm x 200 mm VESA pattern as it has a range of 100 mm x 100 mm to 600 mm x 400 mm. As it can also hold up to 132 pounds, this mount should support both screen sizes of the A1 4K Smart OLED.
When it comes to installation, you can put the Pipishell on brick, concrete, studs that are 16” apart or studs that are 24” apart. The product includes a bubble level and three cable ties.
You can purchase our recommended tilting mount, if you are interested, on Amazon via the following link:
- Pipishell PILTK4 Tilt TV Wall Mount Bracket(#CommissionsEarned)
Compatible full motion wall mount
If you would like to watch your A1 from multiple angles, then you should consider getting a mount that is capable of swiveling. If you are interested in one, then we recommend checking out the EGLF3 Swivel Articulating TV Wall Mount Bracket from ECHOGEAR.
With this product, your LG TV will sit at 2.9” away from the wall. You can then extend it for up to 19 inches.
The extension gives you the ability to swivel the A1 at up to 140 degrees, which is 70 degrees to the left or 70 degrees to the right. You can also tilt your screen at a maximum of 15 degrees.
The EGLF3 has a VESA range of 200 mm x 100 mm to 600 mm x 400 mm, which includes the 300 mm x 200 mm pattern. With a weight capacity limit of 110 pounds, the mount should support both the 55” and 65” screen sizes of the LG A1.
When it comes to installation, you can put the ECHOGEAR EGLF3 on a concrete wall, studs that are 16” apart or studs that are 17” apart. After installation, you can re-level at up to 3 degrees and re-center at up to 5.4 inches.
If you are interested, you can purchase our recommended swiveling mount on Amazon with the following link:
- ECHOGEAR EGLF3 Swivel Articulating TV Wall Mount Bracket(#CommissionsEarned)