In 2021, Insignia updated its F30 Series. If you want to mount these 4K televisions on a wall, then you can follow this guide at Seeking Tech to find the most suitable options.
Mounting Specifications
You can find the mounting specs for the 2021 Insignia F30 below:
Insignia 50-inch F30 Series LED 4K UHD Smart Fire TV (NS-50F301NA22)
- VESA Wall Mount Standard: 200 mm x 200 mm
- Screw Type: M6
- Screw Length: 16 mm to 24 mm
Insignia 55-inch F30 Series LED 4K UHD Smart Fire TV (NS-55F301NA22)
- VESA Wall Mount Standard: 200 mm x 200 mm
- Screw Type: M6
- Screw Length: 16 mm to 24 mm
Insignia 58-inch F30 Series LED 4K UHD Smart Fire TV (NS-58F301NA22)
- VESA Wall Mount Standard: 300 mm x 200 mm
- Screw Type: M6
- Screw Length: 12 mm to 14 mm
For the uninformed, the VESA Wall Mount Standard is a measurement of the horizontal and vertical distances in between the four mounting screw holes located on the back of your 2021 F30.
Compatible fixed mount
If you want a simple fixed mount that won’t be taking up too much space for your 2021 Insignia F30, then we recommend checking out the PSLLK1 Low Profile Fixed TV Wall Mount Bracket from PERLESMITH.
When installed with this mounting bracket, your F30 will be sitting at just 1.3 inch away from the wall. This product also comes with a bubble level tool to help you with installation along with several cable ties.
The PSLLK1 will fit with 200 mm x 200 mm and 300 mm x 200 mm VESA Wall Mount Standards in addition to being able to hold a maximum of 132 pounds. So, this mount should be compatible with the 50-inch, 55-inch and 58-inch 2021 F30 televisions.
The PERLESMITH PSLLK1 can be installed on a brick wall, a concrete wall, studs that are 16 inches apart, studs that are 18 inches apart or studs that are 24 inches apart.
If you are interested, you can purchase the fixed mount via the following link on Amazon:
- PERLESMITH PSLLK1 Low Profile Fixed TV Wall Mount Bracket(#CommissionsEarned)
Compatible tilt mount
Tilting your 2021 F30 will help eliminate screen glares in addition to give you better viewing angles if you planning to mount your Insignia TV high up on a wall. If you are interested in this feature, then we recommend getting the PILTK4 Tilt TV Wall Mount Bracket from Pipishell.
With the PILTK4, your F30 will sit at 1.5 inch away from the wall, giving you the ability to tilt the screen at a maximum of 7 degrees downwards.
This mounting bracket supports the 200 mm x 200 mm and 300 mm x 200 mm VESA Wall Mount Standards. With a weight capacity limit of up to 132 pounds, this product should be compatible with all screen sizes of the 2021 Insignia F30.
You can install the PILTK4 on a brick wall, concrete wall, studs that are 16 inches apart or studs that are 24 inches apart.
You can purchase our recommended tilting mount for your F30, if you are interested, on Amazon with the following link:
- Pipishell PILTK4 Tilt TV Wall Mount Bracket(#CommissionsEarned)
Compatible full motion mount
You may also want to consider getting a swiveling mount if you want to watch your 2021 Insignia F30 from many different angles. If you are interested in doing so, then we recommend taking a look at the MD2413-MX Full Motion TV Wall Mount from Mounting Dream.
With this mounting bracket, your F30 will sit at 2.7 inches away from the wall when fully retracted. You can then extend the screen to a maximum of 16.7 inches away from the wall.
The extension gives you room to swivel your Insignia TV at up to 90 degrees to the left side or up to 90 degrees to the right side. You can also tilt the screen up to 15 degrees downwards or even up to 5 degrees upwards.
In addition to being able to hold up to 77 pounds, the MD2413-MX also supports the 200 mm x 200 mm and 300 mm x 200 mm standards. So, you should be able to use the 50-inch, 55-inch and 58-inch 2021 F30 TVs with this product.
The Mounting Dream MD2413-MX can be installed on a brick wall, concrete wall or single wood stud. After installation, you can also level your F30 in either direction.
Along with the mount, this product also comes with a bubble level, socket wrench in addition to cable ties.
If you are interested, you can purchase the full motion mount for your F30 on Amazon with the following link:
- Mounting Dream MD2413-MX Full Motion TV Wall Mount(#CommissionsEarned)