The A8H 4K Ultra HD Smart OLED is one of the new 2020 television sets from Sony. If you want to mount this TV, you can check out this guide to find the best A8H wall mounts.
The Sony A8H is available in two screen size options with the 55″ and 65″. You can take a look at the model number for each size below.
- 55″: XBR-55A8H
- 65″: XBR-65A8H
Dimensions without Stand
When picking a mount, you should take into consideration the dimensions of your A8H in order to make sure you have enough room on your wall. If you want to tilt or swivel your Sony TV, make sure you leave some extra room to do so as well.
You can find the measurements for both screen sizes, without the stand, below.
- XBR-55A8H TV: 48 3/8″ x 28 1/8″ x 2 1/8″
- XBR-65A8H TV: 57 1/8″ x 33″ x 2 1/8″
Weight Without Stand
You should also look into the weight of your A8H as the mounts have weight limits. You can see how much each of the televisions weighs without a stand below.
- XBR-55A8H TV: 37 pounds
- XBR-65A8H TV: 48.1 pounds
One last factor you should keep in mind is the VESA pattern, which measures the length between the four mounting holes on the back of your Sony A8H. You can check out the VESA spacing for the TVs below.
- XBR-55A8H TV: 300 x 300 mm
- XBR-65A8H TV: 300 x 300 mm
Best low profile fixed wall mount for A8H
If you want a simple low profile wall mount that will keep your A8H fixed into one position, then we recommend taking a look at Mounting Dream’s MD2163-K Fixed TV Mount. With this product, your television set will be just 1.3″ from your wall.
The MD2163-K supports the 300 x 300 mm of the 55″ and 65″ of the A8H 4K Ultra HD Smart OLED series. The weight limit for the mount is 132 pounds, so it can comfortably hold both sizes.
Mounting Dream included details instructions and all the hardware, pack into pre-labeled bags, needed for installation. The company also included a bubble level and cable ties. They will also send concrete anchors at no additional costs upon request. The mount can be installed on concrete walls and wood studs with spacing of 16″, 18″ or 24″.
If you are interested, you can purchase the fixed wall mount on Amazon via the following link:
Best tilt wall mount for A8H
You may also want to consider being able to tilt your A8H TV as doing so will prevent any screen glares. Not to mention that you will also get a better viewing angle if you want to mount your television set higher up on the wall. If you are interested in doing so, we recommend getting another Mounting Dream product called the MD2268-LK TV Wall Mount Bracket. With this installed, your A8H will be 1.5 inches from the wall and can be tilted forward at up to 8 degrees.
The MD2268-LK supports the VESA patterns and weights (with a capacity of 132 pounds) of the 55″ and 65″ models of the Sony A8H 4K Ultra HD Smart OLED series.
You will be able to install the mounting bracket on concrete walls and wood studs with spacing of 16″, 18″ or 24″. Mounting Dream included all the hardware needed (including a bubble level tool), various screws and bonus HDMI cable. For concrete anchors, you will need to contact the company and they will deliver at no additional costs.
If you are interested, you can purchase the tilting mounting bracket on Amazon with the following link:
Best full motion articulating wall mount for A8H
If you would like to swivel you A8H so that you can watch TV in various angles, we recommend getting Everstone’s Heavy Duty Dual Arm Articulating Full Motion TV Wall Mount. With this product, you will be able to extend your A8H from 2.6″ to 14″, tilt 15 degrees forward, tilt 3 degrees backwards, swivel 60 degrees to the left and swivel 60 degrees to the right.
The Everstone Heavy Duty Dual Arm Articulating Full Motion Mounting Bracket supports VESA patterns of up to 400 mm x 400 mm in addition to weights of up to 88 pounds. So it is compatible with both 55″ and 65″ versions of Sony’s A8H television series.
Everstone comes with all the mounting hardware needed for installation as well as a bubble level tool, HDMI cable and cable ties. You can also level your television set post-installation. The mount can be installed on a brick wall, concrete wall and wooden studs with spacing of 8″, 12″ or 16″.
You can purchase the full motion articulating mounting bracket, if you are interested, on Amazon with the following link: