Disclosure: This post may contain text and/or image affiliate links where we may earn commissions when products are purchased.

Addlink S92 Gen4 x4 NVMe SSDs: 1TB vs. 2TB vs. 4TB

The Addlink S92 has different performance speeds depending on the capacity. You can find out what the differences are between the 1 TB, 2 TB and 4 TB versions in this comparison guide.

Quick Summary

When compared to the 1 TB and 2 TB versions, the 4 TB Addlink S92 has a slightly faster maximum sequential reading speed. The 2 TB and 4 TB S92 SSDs are tied with having the best maximum sequential writing speed, which is significantly faster than the write speed of the 1 TB SSD.

Otherwise, the three capacities are the same when it comes to supported features, reliability, warranty coverage and other categories.

If you are interested, you can purchase any of the aforementioned capacity options on Amazon with the following link:

You can check out how the S92 stacks up against the S90 and S95 with this article.

Addlink S92 SSDs Comparison Chart

 1TB Addlink S92 Gen4 x4 NVMe SSD2TB Addlink S92 Gen4 x4 NVMe SSD4TB Addlink S92 Gen4 x4 NVMe SSD
Form FactorM.2 2280M.2 2280M.2 2280
Dimension80.0 mm x 22.0 mm x 3.5 mm 80.0 mm x 22.0 mm x 3.5 mm 80.0 mm x 22.0 mm x 3.5 mm
Weight8.2 grams8.2 grams8.2 grams
NAND 3D QLC3D QLC3D QLC
InterfacesNVMe 1.3 and PCIe Gen4 x4NVMe 1.3 and PCIe Gen4 x4NVMe 1.3 and PCIe Gen4 x4
Maximum Sequential Read Speed Up to 4700 MB per secondUp to 4850 MB per secondUp to 4900 MB per second
Maximum Sequential Write Speed Up to 1850 MB per secondUp to 3600 MB per secondUp to 3600 MB per second
SSD ToolBox SoftwareSupportedSupportedSupported
General Features TRIMM DEVSLP

Garbage Collection

ECC

S.M.A.R.T

SLC Caching

Wear Leveling

Bad Block Management

Over-Provision

RAID Protection

Low Density Parity Check
TRIMM DEVSLP

Garbage Collection

ECC

S.M.A.R.T

SLC Caching

Wear Leveling

Bad Block Management

Over-Provision

RAID Protection

Low Density Parity Check
TRIMM DEVSLP

Garbage Collection

ECC

S.M.A.R.T

SLC Caching

Wear Leveling

Bad Block Management

Over-Provision

RAID Protection

Low Density Parity Check
Operating System RequirementsLinux Kernel 2.6.31 or newer

Microsoft Windows 7 (requires additional driver)

Microsoft Windows 8 (requires additional driver)

Microsoft Windows 10
Linux Kernel 2.6.31 or newer

Microsoft Windows 7 (requires additional driver)

Microsoft Windows 8 (requires additional driver)

Microsoft Windows 10
Linux Kernel 2.6.31 or newer

Microsoft Windows 7 (requires additional driver)

Microsoft Windows 8 (requires additional driver)

Microsoft Windows 10
Operating Temperature0°C to 70°C0°C to 70°C0°C to 70°C
Storage Temperature-40°C to 85°C-40°C to 85°C-40°C to 85°C
MTBF1.8 million hours1.8 million hours1.8 million hours
Warranty Period5-year warranty5-year warranty5-year warranty

Form Factor

The three capacities of the S9S SSD use the M.2 2280 form factor.

Dimension

The dimensions are also identical for the 1 TB, 2 TB and 4 TB capacity options. You can take a look at the measurements, which is displayed in Length x Width x Maximum Height, below:

  • 80.0 mm x 22.0 mm x 3.5 mm

Weight

The three versions of S92 Gen4 x4 Solid State Drive are also the same when it comes to weight as each weigh around 8.2 grams.

NAND

The 1 TB, 2 TB and 4 TB capacity options are equipped with 3D QLC for NAND.

Interfaces

Furthermore, the three Addlink storage drives utilize the NVMe 1.3 and PCIe Gen4 x4 interfaces.

Maximum Sequential Read Speed

According to internal tests done by Addlink using the CrystalDiskMark software, the 4 TB capacity is the fastest at maximum sequential reading at it beats out the 2 TB capacity by 50 MB per second (or 1.03% faster) and 1 TB capacity by 200 MB per second (or 4.26% faster).

You can find the maximum sequential read speeds below:

  • 1TB Addlink S92: Up to 4700 MB per second
  • 2TB Addlink S92: Up to 4850 MB per second
  • 4TB Addlink S92: Up to 4900 MB per second

Maximum Sequential Write Speed

The 2 TB and 4 TB versions of the S92 are tied with having the best maximum sequential writing speed. Both of the bigger capacities are 1750 MB per second faster (or 105.41% faster) than the 1 TB version.

You can take a look at the maximum sequential write speed specifications below:

  • 1TB Addlink S92: Up to 1850 MB per second
  • 2TB Addlink S92: Up to 3600 MB per second
  • 4TB Addlink S92: Up to 3600 MB per second

SSD ToolBox Software

All three capacity sizes support SSD ToolBox, a software you can use to check on the status of the solid state drive, securely erase sensitive data and more.

General Features

The 1 TB, 2 TB and 4 TB SSDs also support the same general features, which you can find a list of below:

  • Garbage Collection
  • ECC
  • S.M.A.R.T
  • SLC Caching
  • Wear Leveling
  • Bad Block Management
  • Over-Provision
  • RAID Protection
  • Low Density Parity Check
  • TRIMM DEVSLP

Operating System Requirements

The three capacities also have the same operating system requirements, which you can check out below:

  • Linux Kernel 2.6.31 or newer
  • Microsoft Windows 7 (requires additional driver)
  • Microsoft Windows 8 (requires additional driver)
  • Microsoft Windows 10

Operating Temperature

The recommended operating temperature range of the 1 TB, 2 TB and 4 TB variants of the Addlink S92 is from 0°C to 70°C.

Storage Temperature

The three capacities also have the same recommended storage temperature range, which is from -40°C to 85°C.

MTBF

The S92 solid state drives have a MTBF of 1.8 million hours. MTBF stands for Mean Time Between Failures, which is a measurement of how long an SSD is expected to function normally between two hardware failures.

Warranty Period

The 1TB Addlink S92 Solid State Drive, 2TB Addlink S92 Solid State Drive and 4TB Addlink S92 Solid State Drive each comes with a 5-year warranty.

Resource:

Share This: